Skyjack SJ6826 RT Operation Manual
  1. Manuals
  2. Brands
  3. Skyjack Manuals
  4. Scissor Lifts
  5. SJ6826 RT
  6. Operation manual

Skyjack SJ6826 RT Operation Manual

Rough terrain scissors
Hide thumbs Also See for SJ6826 RT:
Table of Contents

Advertisement

Quick Links

OPERATION
MANUAL
SJ6826 RT, SJ6832 RTE
ROUGH TERRAIN SCISSORS
221587ACA
November 3 2022
ANSI/CSA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SJ6826 RT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Skyjack SJ6826 RT

Summary of Contents for Skyjack SJ6826 RT

  • Page 1 OPERATION MANUAL SJ6826 RT, SJ6832 RTE ROUGH TERRAIN SCISSORS 221587ACA November 3 2022 ANSI/CSA...
  • Page 2 This manual is for MEWPs with serial numbers: SJ6826 RT, SJ6832 RT: A200 000 001 & above Please refer to the website (www.skyjack.com) for contact information, other Serial Numbers, the most recent Technical Manuals, and USB software. The original instructions are in English.
  • Page 3 It may also be used to alert against unsafe practices. Blue Safety information. IMPORTANT IMPORTANT indicates a procedure essential for safe operation and which, if not followed, may result in a malfunction or damage to the MEWP . SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 4 Notes 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 5: Table Of Contents

    Freewheeling valve ............. 27 SJ6826 RT, SJ6832 RT...
  • Page 6 4.3-14 Do a test of the horn ............48 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 7 Install the propane cylinder ............75 SJ6826 RT, SJ6832 RT...
  • Page 8 Section 9 – Unique Skyjack Features ........

  • Page 9: Section 1 - About This Mobile Elevating Work Platform (Mewp)

    1.1-6 Service policy and warranty A MEWP is a mobile machine intended for moving Skyjack warrants each new product to be free of persons, tools, and material to working positions. It defective parts and workmanship for the first 2 years consists of a work platform with controls, an extending or 3000 hours, whichever occurs first.

  • Page 10: Scope Of This Manual

    SJ Rough Terrain Scissor Lift series. For a list of applicable models, refer to section 7.1. Equipment identified with ANSI meets the ▪ ANSI SAIA-A92.20-2018 standard. Equipment identified with CSA meets the CSA ▪ B354.6:2017 standard. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 11: Primary Assemblies

    Hydraulic manifolds. ▪ A platform control console ▪ An emergency-lowering system. ▪ An AC power outlet. ▪ A liquid propane gas (LPG) tank (optional ▪ equipment). A ladder at the rear of the base. ▪ SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 12: Serial Number Nameplate

    Capacity and maximum number of persons ▪ Voltage ▪ Maximum drive height ▪ Maximum platform height ▪ Maximum wind speed ▪ Maximum manual force ▪ Model year ▪ MEWP weight ▪ System pressure ▪ Maximum incline. ▪ 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 13: Maintenance Responsibility

    IMPORTANT Only use original or manufacturer-approved parts and components for the MEWP . NOTE Refer to the Skyjack website (www.skyjack.com) for machine registration and latest service bulletins before you do frequent, periodic or annual inspections. 1.4-3 Owner The owner is responsible for the maintenance inspections and repairs.
  • Page 14 Notes 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 15: Section 2 - General Safety Precautions

    ▪ Keep a minimum safe distance It was modified without permission from ▪ from sources of high-voltage Skyjack and the MEWP owner. power. If you do not obey, there is a risk of death or serious injury. 2.1 Electrocution hazards...

  • Page 16: Safety Instructions

    MAKE SURE the ground condition assessment DO NOT allow the considers the subsurface voids such as cellars, entanglement of ropes, cables basements, culverts, and pipes. or hoses with the MEWP , adjacent structures or objects. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 17 DO NOT use the MEWP as a crane. DO NOT use the MEWP when the wheels or tires are damaged. Make sure the wheel nuts are tight. Refer to section 4.2-5. DO NOT sit, stand, or climb on the guardrails. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 18 DO NOT place materials on the guardrails entry gate(s) in place. or materials that exceed the confines of the guardrails unless approved by Skyjack. Remove all personnel from the platform before you try to free a snagged platform with the base DO NOT use the MEWP under controls.

  • Page 19: Fall-Protection

    If personal fall-protection equipment (PFPE) is potentially flammable gases, explosive gases or required, by an employer or the authority having particles) are appropriate for the MEWP specifications jurisdiction, Skyjack recommends the use of a full (refer to section 7.5). body harness with a lanyard. PFPE must be attached...
  • Page 20 Notes 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 21: Section 3 - Familiarization

    8) on the MEWP . Do these tasks before the operation: 1. Worksite inspection. Refer to section 2.4. 2. Daily visual and maintenance inspections. Refer section 4.2. 3. Function tests. Refer to section 4.3. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 22: Overview Of The Mewp

    Section 3 – Familiarization Overview of the MEWP 3.1 Overview of the MEWP Platform control console Manual Outrigger/generator storage box control console Base control (optional equipment) console Emergency- lowering/ brake release/ freewheeling valves Main power disconnect switch 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 23: Manual Storage Box

    The switch must be in the on position to operate the MEWP . The switch must be in the off position when you transport the MEWP or put it in storage. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 24: Base Control Console

    (LPG) or gasoline as the fuel type. Glow plug indicator (diesel): This light comes on when the glow plug switch is held. It stays on until the glow plug heating cycle is complete. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 25: Platform Control Console

    Emergency-stop/operation light: This button disconnects power to the control circuit. When the light is on continuously, the platform ▪ controls are available. When the light flashes, there is an overload ▪ (refer to section 3.4-8) SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 26: Features And Devices

    < SJ6826 RT 2.13 m (7 ft) Full height < SJ6832 RT Full height 2.13 m (7 ft) Brake hand pump Brake auto-reset valve plunger Figure 01 Lowered and elevated travel position 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 27: Freewheeling Valve

    Refer to section 6.1 for the emergency-lowering procedure. Freewheeling valve Holding-valve manual override knob Emergency-lowering access rod Emergency-lowering valve SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 28: Fall-Protection Anchorage

    Do not try to free a snagged platform with the base controls until you remove all personnel from the platform. If you do not obey, there is a risk of death or serious injury. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 29: Maintenance Support

    The propane cylinder is available in MEWPs with dual fuel engines. Propane cylinder valve: Turn the valve clockwise to close the fuel supply. Turn the valve counterclockwise to open the fuel supply. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 30: Extension Platform

    Refer to section 5.9 on how to extend CAUTION and retract the extension platform. Skyjack approved modifications and attachments can change the MEWP specifications. Refer to the applicable instructions and labels. IMPORTANT Refer to the labels of the optional equipment the actual weight.

  • Page 31: Elevate™ Telematics - Access Control Unit

    The main power disconnect switch. ▪ Smart ID cards for MEWPs that have the access The emergency-stop button on the base control control function. Skyjack does not supply or reset ▪ PIN codes or Smart ID cards. Speak to the MEWP console.

  • Page 32: Outrigger/Generator Control Console

    The emergency-stop button on the base control position, this switch enables functions of the ▪ console auto-level switch and outrigger extend/retract switches. The idle/platform/base key switch. ▪ Generator switch: This switch turns the generator on or off. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 33: Hydraulic Generator

    MEWP is not level, or there is an quickly outrigger or auto-level function error. The outriggers are extended and the MEWP is level. The light is on while the auto-level function is active only. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 34 Notes 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 35: Section 4 - Inspections Before Operation

    If the MEWP is damaged or has been modified from the initial factory-delivered condition, without permission from Skyjack, lock and tag the MEWP . Remove the MEWP from service. If you do not obey, there is a risk of death or serious injury.

  • Page 36: Visual And Daily Maintenance Inspections

    The ground area below the MEWP ▪ for servicing. Only a qualified service technician Outriggers (optional equipment). ▪ must repair the MEWP . If you do not obey, there is a risk of death or serious injury. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 37: Base

    There are no loose or missing parts. ▪ The tie rod end studs are attached and tight. ▪ Do not use tires other than the tires that Skyjack There is no visible damage. specifies for this MEWP . Do not mix different types ▪...

  • Page 38: Engine Compartment

    Make sure all the battery connections are tight. ▪ If applicable, check the battery fluid levels. If ▪ the plates do not have a minimum 13 mm (1/2 inch) of solution above them, add distilled or demineralized water. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 39 Make sure that the muffler and exhaust ▪ leakage. systems are correctly attached with no visible damage. Engine and pivot tray Make sure there are no loose or missing parts. ▪ SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 40: Hydraulic Compartment

    Make sure that there are no loose or missing ▪ on the gauge. parts. Make sure there is no visible damage or ▪ hydraulic leaks. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 41: Platform Assembly

    Make sure the platform control cable is ▪ Make sure that the fall-protection anchorages ▪ correctly routed. are correctly installed. 3. Use the MEWP ladder to exit the platform. Make sure there is no visible damage. ▪ SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 42: Lift Mechanism

    Make sure all the pins and fasteners are ▪ correctly installed, including the connections to the base and platform. Make sure that the cables and wires have the ▪ correct routing, and show no signs of wear and/or physical damage. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 43: Function Tests

    5. Start the engine at the base. emergency-stop button comes on. This shows 6. Turn the main power disconnect switch to the that the system is in operation, and there are off position. no faults. Result: The engine stops. ▪ SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 44: Do A Test Of The Idle/Platform/Base Key Switch

    Result: The platform lowers. ▪ in the raise position. 6. Press and turn the manual override knob of the Result: The platform raises. ▪ holding valve clockwise until it stops to restore normal operation. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 45: Do A Test Of The Positive Air Shutoff (Optional Equipment)

    3. Open the engine compartment cover. 4. Lift the switch guard for the positive air shutoff on the base control console. 5. Move the positive air shut-off switch to the on position to engage the shutoff valve SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 46: Do A Test Of The Platform Emergency-Stop

    2. Squeeze and hold the function-enable switch Result: The engine stops. ▪ 3. Press the steering rocker switch on top of the controller handle to steer left and right. Result: The steer wheels turn left and right. ▪ 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 47: 10 Do A Test Of The Drive Function

    7 seconds. 4. Slowly push the controller handle to move the MEWP in the forward direction. Result: The MEWP does not move in the ▪ forward direction. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 48: 13 Do A Test Of The Platform Raise And Lower Functions

    5. Pull the controller handle to fully lower the platform. Result: The platform fully lowers. ▪ 4.3-14 Do a test of the horn 1. Press the horn button Result: The horn makes a sound. ▪ 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 49: 16 Do A Test Of The Sgle Switch (Optional Equipment)

    4. Push and hold the SGLE button only. Do not squeeze the function-enable switch . Push and pull the controller handle to raise or lower the platform. Result: The platform does not raise or lower. ▪ SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 50: 17 Do A Test Of The Outrigger Interlocks (Optional Equipment)

    8. Move and hold the auto level switch in the retract position to fully retract all four outriggers. Result: All four outriggers fully retract. ▪ 9. Move and hold the auto-level enable switch in the enable position. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 51: 18 Do A Test Of The Auto-Level (Optional Equipment)

    3. Move the lift/off/drive switch to the lift Result: All four outriggers fully retract. ▪ position. 4. Move and hold the auto-level enable switch in the enable position. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 52: 19 Do A Test Of The Generator (Optional Equipment)

    The generator starts. The light goes on. 4. Move the generator switch to the off position. Result: The generator stops. The light goes ▪ off. The throttle goes back to idle. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 53: Operator's Checklist

    Each item shall be inspected using the appropriate section PASS NOT APPLICABLE of the Skyjack operating manual. As each item is inspected, Add a comment if the item does not pass inspection. check or complete the appropriate box. Comment (if item does not pass inspection)
  • Page 54 Section 4 – Inspections Before Operation Operator’s Checklist Operator’s Checklist (page 2 of 2) of the Skyjack operating manual. As each item is inspected, Add a comment if the item does not pass inspection. check or complete the appropriate box.

  • Page 55: Section 5 - Operation

    It was modified without permission from ▪ button for 15 to 20 a. Push the Skyjack and the MEWP owner. seconds, until the Diesel engine start If you do not obey, there is a risk of death or light turns off.

  • Page 56: Raise Or Lower The Platform With The Base Control Console

    If you do not obey, there is a risk of death or serious injury. 4. Use the MEWP ladder to enter the platform. 5. Close the gate. 6. Pull the emergency-stop button on the platform control console. 7. Start the engine. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 57: Drive Forward Or Rearward

    2. Move the lift/off/drive switch to the drive position. 3. Squeeze and hold the function-enable switch. 4. Move the controller handle forward or rearward to drive at and in the necessary speed and direction. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 58: Select The Level-Drive Or Inclined-Drive Mode

    When you drive on rough ground ▪ When you drive the MEWP on to or remove it ▪ from a transport vehicle. 1. To use the inclined-drive, move the inclined- drive/level-drive switch to the inclined-drive (low speed/high torque) position. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 59: Use The Auto-Level (Optional Equipment)

    MEWP is level. The light is on while the auto-level function is active only. 4. Make sure each outrigger pad is in firm contact over its entire surface area, with a suitable supporting surface. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 60: Mewp Shutdown

    5. Turn the idle/platform/base key switch to the idle position on the base control console and remove the key. 6. Push the emergency-stop button. 7. Turn the main power disconnect switch to the off position. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 61: Section 6 - Additional Procedures

    6. Find the emergency-lowering valve the hydraulic compartment, pull and hold the emergency-lowering valve to lower the platform. 7. Press and turn the override knobs of each holding valve clockwise until it stops to restore normal operation. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 62: Release The Brakes Manually

    The Tip-over hazard. Disengage the brakes manually brake is released. before you push, winch, or tow the MEWP . If you do not obey, there is a risk of death or serious injury. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 63: Move The Mewp For Transport

    Remove all personnel, tools, and materials from ▪ the platform. Lift the MEWP with the forklift forks in the forklift ▪ lift locations . Refer to Figure 035. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 64: Hoist The Mewp

    Remove all personnel, tools, and materials from ▪ the platform. Attach the rigging to all four lift points . Refer ▪ Figure Figure 04 Appropriate method to hoist 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 65: Drive And Tie-Down The Mewp

    Refer to Figure 06. Vertically, the center of gravity is approximately a small distance above the chassis. ������ ������� � �������� 124631AC Figure 06 MEWP Center of Gravity SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 66: Use The Platform Control Console From The Ground

    MEWP ladder to enter risk of death or serious injury. or exit the platform. If you do not obey, there is a risk of death or serious injury. 2. Use the MEWP ladder to enter the platform. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 67 6. Use as low a speed as practical to drive the MEWP forward to the necessary location. 7. Push the emergency-stop button when the MEWP is at the necessary location. 8. Turn the main power disconnect switch to the off position. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 68: Fold The Guardrails

    The guardrail system must be in the vertical position. Lock all pins correctly. An incorrectly locked guardrail can cause a fall, which can result in death or serious injury. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 69 Fall hazard. To prevent a fall, keep away from the sides of the platform when you fold or unfold the 15. Fold down the left-side extension guardrail. guardrails. If you do not obey, there is a risk of death or serious injury. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 70: Unfold The Guardrail System Up

    12. Put in all locking pins to lock the right side guardrail in position. 13. Unfold the left-side extension guardrail. 14. Put in the locking pin to lock the left-side extension guardrail in position. 15. Unfold the right-side extension guardrail and the front guardrail. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 71: Move The Mewp Through A Doorway

    If you do not obey, there is a risk of death or serious injury. 6. Connect the platform control console cable to the electrical plug in the engine compartment of the MEWP . Refer to section 6.5. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 72 21. Return the guardrails to the vertical position if folded. Refer to section 6.6 for the procedure on how to fold the guardrails. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 73: Use The Maintenance Support

    Crush hazard. Do not put parts of your body through the scissor assembly unless the maintenance support is correctly deployed. If you do not obey, there is a risk of death or serious injury. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 74: Refuel

    2. Push all the emergency-stop buttons, and turn tag the MEWP for servicing or repair. If you do not the main power disconnect switch to the off obey, there is a risk of death or serious injury. position. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 75: Remove The Propane Cylinder

    6. Open the valve one quarter-turn counterclockwise. Do an inspection for gas leaks. 7. If there are no gas leaks, fully open the propane cylinder valve. 8. Wipe off the soapy water after the inspection is complete. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 76 Notes 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 77: Section 7 - Technical Specifications

    Non marking grip lug foam-filled tires 3.5 kW hydraulic generator Cold Weather start package Bio oil Work lights Positive air shutoff Tool caddy Outriggers Diesel scrubber Elevate Telematics Secondary Guarding Lift Enable (SGLE) 1967AA SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 78: Owner's Annual Inspection Record

    13 months. If you do not obey, there is a risk of death or serious injury. IMPORTANT The Owner’s Annual Inspection Record on the scissor assembly must be filled out after an annual inspection is completed. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 79: Specifications

    Emission sound pressure level at platform does not exceed 70 dB(A). Vibration - acceleration to which operator’s body is subjected does not exceed 0.5 m/sec * Weights are approximate; refer to serial nameplate for specific weight. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 80: Maximum Platform Capacities (Evenly Distributed)

    96 dB Power Level (ISO 4871) Whole-body Vibration on Plat- ≤ 0.5 m/s form Operating Temperatures Standard -20°C (-4°F) to +40°C (+104°F) Cold Weather Package Below -10°C (+14°F) Arctic Weather Package Below -18°C (0°F) 1904AA 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 81: Floor Loading Pressure

    WARNING Do not use tires other than the tires that Skyjack specifies for this MEWP . Do not mix different types of tires or use tires that are not in good condition.
  • Page 82 Notes 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 83: Section 8 - Labels

    Section 8 – Labels DANGER. Orange WARNING. Yellow CAUTION. Green Emergency- lowering procedure. Blue Safety information. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 84: Engine Compartment

    ▪ controls active or to enable base control console. Read the operating manual. ▪ Positive air shutoff (optional equipment) Select the positive air shut-off switch (optional) to stop the air supply to the engine. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 85 Turn the switch counterclockwise to turn the power off. ▪ Use a padlock to lock the switch in position. ▪ �� 90 lb-in 10.2 N-m Battery fuse assembly Assemble fuse as shown. Torque to value indicated. ���������� SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 86: Right Side

    Read and understand the outlined risks associated with this ▪ MEWP prior to operation. Indicates location of operating manual. ▪ 172267ACZZ Skyjack logo Model number* Product Identifier *Model number will vary and may not be as shown. Caution tape stripe 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 87 Keep clear. Stay away from MEWP when in operation. Annual inspection Ensure that MEWP has received annual inspection prior to operation. Model number* Product Identifier *Model number will vary, may not be as shown. Tip-over hazard Wheel specifications SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 88 Elevate™– Powered by Trackunit (optional equipment) This MEWP is equipped with additional functionality. QR code This code gives you fast access to the MEWP documentation, and the live MEWP data supplied by ELEVATE telematics (optional equipment). 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 89: Front Side

    Skyjack logo Caution tape stripe Serial plate Product identification and specifications �� Maintenance support Deploy maintenance support here. ���������� Skyjack manufactured date Manufactured Shows the month and year of manufacture for this MEWP . /YYYY SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 90 5. Turn Main power disconnect switch to on position. 6. Raise platform until there is adequate clearance to retract the maintenance support. 7. Retract the maintenance support up and place into storage bracket. 8. Fully lower the platform. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 91: Left Side

    8.4 Left side Description Label Pictorial Skyjack logo Model number* Product Identifier *Model number will vary, may not be as shown. Caution tape stripe Keep clear Keep clear. Stay away from MEWP when in operation. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 92 Section 8 – Labels Left side Left side (continued) Description Label Pictorial Model number* Product Identifier *Model number will vary, may not be as shown. Connect AC supply Connect AC Supply here. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 93 MEWP movement. 9. Pull out the plunger of the brake auto-reset valve to re- engage the brakes. 10. Turn the freewheeling valve clockwise until it is closed tightly. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 94 160059ACZZ a. push b. turn knurled knob counterclockwise. 3. To lower the platform, pull out emergency-lowering valve located on the outside of the hydraulic tray. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 95: Hydraulic/Fuel Compartment

    Low sulfur fuel or ultra low sulfur fuel only. Diesel (optional equipment) Use diesel fuel only. Diesel, EN 590, DIN 51 628 Unleaded fuel Use unleaded gasoline only. No smoking Do not smoke near this location. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 96: Rear Side

    Perform visual inspection and function tests at the beginning ▪ of each shift. Refer to Section 4: Maintenance and Inspection Schedule. No jewelry Caution–Do not wear jewelry. Warning–Do not alter Do not alter or disable limit switches or other safety devices. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...
  • Page 97 Rear side (continued) Isometric view Description Label Pictorial Lift and tie-down points Only use these points for lifting or tying down. Warning–California Proposition 65 WARNING Cancer and Reproductive Harm– Cancer and Reproductive Harm- https://www.p65warnings.ca.gov/ https://www.p65warnings.ca.gov/. SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 98: Propane Tank

    Section 8 – Labels Propane tank 8.7 Propane tank       PROPANE   Description Label Pictorial Liquid propane Use liquid propane only. Propane PROPANE Use liquid propane only. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 99: Platform View

    Platform view Section 8 – Labels 8.8 Platform view Description Label Pictorial Platform capacity Platform capacity label for SJ6826 RT and SJ6832 RT ▪ respectively. Rated work load in each configuration is as shown. ▪ ( lb) Rated work load includes the weight of both personnel and ▪...
  • Page 100 Fall protection anchorage Attach body harness lanyards of each occupant to fall ▪ protection anchorage points. Rated for one (1) person per anchorage. ▪ Railing pins (vertical) WARNING! Falling Hazard. Ensure hinged railing is pinned. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 101: Platform Control Console

    Select and hold to operate choke (dual fuel) or glow plugs ▪ (diesel). Push to sound horn. ▪ Push to stop engine and disable controls (emergency-stop). ▪ Light indicates controls enabled. ▪ Read the operating manual. ▪ 166089ABZZ SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 102: Lift Cylinders

    160059ACZZ a. push b. turn knurled knob counterclockwise. 3. To lower the platform, pull out emergency-lowering valve located on the outside of the hydraulic tray. 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 103: Outriggers (Optional Equipment)

    Do not alter or disable limit switches or other safety devices. �� Outrigger load (optional equipment) Indicates rated outrigger load. � � � � �� � � � � � � �� � � ���������� SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...

  • Page 104: Outrigger And Generator Control Console (Optional Equipment)

    Solid: The outriggers are extended and the platform is level. ▪ Automatic outrigger control console Select to retract all outriggers or to extend all outriggers with ▪ automatic leveling. Select to enable manual or automatic outrigger controls. ▪ 133228AB 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 105: Air Supply Options (Optional Equipment)

    Air supply options (optional equipment) Section 8 – Labels 8.13 Air supply options (optional equipment) Description Label Pictorial Connect air supply �� ������� ������� Connect platform air supply here. ���������� SJ6826 RT, SJ6832 RT 221587ACA 221587ACA...
  • Page 106 Notes 221587ACA SJ6826 RT, SJ6832 RT 221587ACA...

  • Page 107: Section 9 - Unique Skyjack Features

    Having equipment with features and functionality that allow you and your customers to do more is a vital part of the utilization equation. Skyjack offers a range of accessory products to expand a MEWP’s functionality and your power to offer a truly flexible rental choice.
  • Page 108 WARNING Cancer and Reproductive Harm- https://www.p65warnings.ca.gov/...
  • Page 110 www.skyjack.com...

This manual is also suitable for:

Sj6832 rte

Table of Contents