Skyjack SJ6832 RTE Operation Manual
  1. Manuals
  2. Brands
  3. Skyjack Manuals
  4. Scissor Lifts
  5. SJ6832 RTE Series
  6. Operation manual

Skyjack SJ6832 RTE Operation Manual

Rough terrain scissors
Hide thumbs Also See for SJ6832 RTE:
Table of Contents

Advertisement

Quick Links

OPERATION
MANUAL
SJ6832 RTE
ROUGH TERRAIN SCISSORS
221844ACAI
August 2021
CE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SJ6832 RTE and is the answer not in the manual?

Questions and answers

Reginald Russell
July 21, 2025

how does the outriggers engage

0

Subscribe to Our Youtube Channel

Related Manuals for Skyjack SJ6832 RTE

Summary of Contents for Skyjack SJ6832 RTE

  • Page 1 OPERATION MANUAL SJ6832 RTE ROUGH TERRAIN SCISSORS 221844ACAI August 2021...
  • Page 2 This manual is for MEWPs with serial numbers: SJ6832 RTE: A201 000 001 & Above Please refer to the website (www.skyjack.com) for contact information, other Serial Numbers, the most recent Technical Manuals, and USB software. Original instructions in English.
  • Page 3 It may also be used to alert against unsafe practices. Blue Safety information. IMPORTANT IMPORTANT indicates a procedure essential for safe operation and which, if not followed, may result in a malfunction or damage to the MEWP . SJ6832 RTE 221844ACAI...
  • Page 4 Notes SJ6832 RTE 221844ACAI...

  • Page 5: Table Of Contents

    Freewheeling valve ............. 26 SJ6832 RTE...
  • Page 6 4.3-14 Do a test of the platform raise and lower functions ........44 SJ6832 RTE...
  • Page 7 Refuel the Hybrid Power Pack (HPP) with Diesel ........75 SJ6832 RTE...
  • Page 8 Section 9 – Unique Skyjack Features ........

  • Page 9: Section 1 - About This Mobile Elevating Work Platform (Mewp)

    3000 hours, whichever occurs first. Any defective 1.1-2 Purpose of equipment part will be replaced or repaired by your local Skyjack The Skyjack Rough Terrain Electric Scissor lifts are dealer at no charge for parts or labor. In addition, designed to move personnel, tools, and materials to all products have a 5 year structural warranty.

  • Page 10: Scope Of This Manual

    1. This manual applies to the CE version of the SJ Rough Terrain Electric Scissor Lift series. For a list of applicable models, refer to section 7.1. Equipment identified with CE meets the ▪ requirements of the Machinery Directive 2006/42/EC and the EMC Directive 2014/30/ SJ6832 RTE 221844ACAI...

  • Page 11: Primary Assemblies

    A front extension platform ▪ Hydraulic manifolds ▪ A platform control console ▪ An emergency-lowering system. ▪ An AC power outlet. ▪ A ladder at the rear of the base. ▪ Two front and two rear outriggers (optional ▪ equipment). SJ6832 RTE 221844ACAI...

  • Page 12: Serial Number Nameplate

    Capacity and maximum number of persons ▪ Voltage ▪ Maximum drive height ▪ Maximum platform height ▪ Maximum wind speed ▪ Maximum manual force ▪ Model year ▪ MEWP weight ▪ System pressure ▪ Maximum incline. ▪ SJ6832 RTE 221844ACAI...

  • Page 13: Maintenance Responsibility

    IMPORTANT Only use original or manufacturer-approved parts and components for the MEWP . NOTE Refer to the Skyjack web site (www.skyjack.com) for machine registration and the latest service bulletins before you do frequent/periodic or annual inspections. 1.4-3 Owner The owner is responsible for maintenance inspections and repairs.
  • Page 14 Notes SJ6832 RTE 221844ACAI...

  • Page 15: Section 2 - General Safety Precautions

    ▪ DO NOT operate the MEWP during lightning or storms. It was modified without permission from ▪ Skyjack and the MEWP owner. If you do not obey, there is a risk of death or serious injury. 2.1 Electrocution hazards CAUTION The MEWP is not electrically insulated and does not DO NOT use the MEWP as a ground for welding.

  • Page 16: Safety Instructions

    DO NOT allow the entanglement MAKE SURE the ground condition assessment of ropes, cables or hoses with considers subsurface voids such as cellars, the MEWP , adjacent structures basements, culverts, and pipes. or objects. SJ6832 RTE 221844ACAI...
  • Page 17 DO NOT use the MEWP as a crane. DO NOT use the MEWP when the wheels or tires are damaged (refer to section 4.2-4). Make sure the wheel nuts are tight. DO NOT sit, stand, or climb on the guardrails. SJ6832 RTE 221844ACAI...
  • Page 18 DO NOT place materials on the guardrails entry gate(s) in place. or materials that exceed the confines of the guardrails unless approved by Skyjack. Remove all personnel from the platform before you try to free a snagged platform with the base DO NOT use the MEWP under controls.

  • Page 19: Fall-Protection

    If personal fall-protection equipment (PFPE) is potentially flammable gases, explosive gases or required, by an employer or the authority having particles) are appropriate for the MEWP specifications jurisdiction, Skyjack recommends the use of a full (refer to section 7.3). body harness with a lanyard. PFPE must be attached...
  • Page 20 Notes SJ6832 RTE 221844ACAI...

  • Page 21: Section 3 - Familiarization

    (refer to 8) on the MEWP . Section Do these tasks before the operation: 1. Worksite inspection. Refer to section 2.4. 2. Daily visual and maintenance inspections. Refer section 4.2. 3. Function tests. Refer to section 4.3. SJ6832 RTE 221844ACAI...

  • Page 22: Overview Of The Mewp

    Section 3 – Familiarization Overview of the MEWP 3.1 Overview of the MEWP Platform Control Console Manual Outrigger/Generator Storage Box Base Control Control Console Console (optional equipment) Emergency Lowering / Brake Release / Freewheeling Valves Main Power Disconnect Switch SJ6832 RTE 221844ACAI...

  • Page 23: Manual Storage Box

    MEWP or put it in storage. Platform/off/base key: With this three-way switch, you can: Energize the platform controls. ▪ Turn off the power to the MEWP controls. ▪ Energize the base controls. ▪ SJ6832 RTE 221844ACAI...

  • Page 24: Platform Control Console

    Lift/off/drive: This switch has three positions or modes. The off position on this switch disconnects the ▪ power to both the lift and drive circuits. The lift position energizes the lift circuit. ▪ The drive position energizes the drive circuit. ▪ SJ6832 RTE 221844ACAI...

  • Page 25: Features And Devices

    Model A - Height height for the procedure. Refer to section 6.2 section 3.1 SJ6832 RTE < 2.13 m Full height the location of the brake-release system. Brake hand pump Brake auto-reset valve plunger Figure 01 Lowered and elevated travel position...

  • Page 26: Freewheeling Valve

    MEWP fully lowers. Make sure that no person is near the MEWP before you continue to lower the MEWP the remaining distance. Holding valve manual override knob Emergency-lowering access rod Emergency-lowering valve SJ6832 RTE 221844ACAI...

  • Page 27: Fall-Protection Anchorage

    MEWP damage can occur. Fall hazard. Do not try to free a snagged platform with the base controls until you remove all personnel from the platform. If you do not obey, there is a risk of death or serious injury. SJ6832 RTE 221844ACAI...

  • Page 28: 10 Maintenance Support

    When you fold down this system, it decreases the height of the fully-lowered MEWP to transport the MEWP and/or to drive the MEWP through doorways. Refer to for the procedure on how to fold section 6.8 the guardrails. SJ6832 RTE 221844ACAI...

  • Page 29: Extension Platform

    Refer to on how to extend section 5.9 CAUTION and retract the extension platform. Skyjack approved modifications and attachments can change the MEWP specifications. Refer to the applicable instructions and labels. IMPORTANT Refer to the labels of the optional equipment the actual weight.

  • Page 30: Hybrid Power Pack (Hpp)

    The owner is responsible to supply PIN codes or Smart ID cards for MEWPs that have the access control function. Skyjack does not supply or reset PIN codes or Smart ID cards. Speak to the MEWP owner to help you with PIN codes or Smart ID cards that do not function, or you cannot find.
  • Page 31 With the Smart ID Card: 1. Put the card in front of the reader. 2. A beep identifies that the reader read the card. Result: The green light identifies an ▪ approved ID. Start the operation. SJ6832 RTE 221844ACAI...

  • Page 32: Outrigger/Generator Control Console

    The outriggers are extended and Flashing the MEWP is not level, or there is an quickly outrigger or auto-level function error. The outriggers are extended and the MEWP is level. The light is on while the auto-level function is active only. SJ6832 RTE 221844ACAI...

  • Page 33: Section 4 - Inspections Before Operation

    If the MEWP is damaged or has been modified from the initial factory-delivered condition, without permission from Skyjack, lock and tag the MEWP . Remove the MEWP from service. If you do not obey, there is a risk of death or serious injury.

  • Page 34: Visual And Daily Maintenance Inspections

    CAUTION Outriggers (optional equipment). ▪ Make sure that the MEWP is on a firm, level surface before you do the visual and daily maintenance inspections. If you do not obey, there is a risk of machine damage. SJ6832 RTE 221844ACAI...

  • Page 35: Wheels/Tire Assembly

    There are no loose or missing parts. ▪ The tie rod end studs are attached and tight. Do not use tires other than the tires that Skyjack ▪ specifies for this MEWP . Do not mix different types There is no visible damage.

  • Page 36: Electrical Compartment

    Explosion hazard. Keep flames and sparks away. Do not smoke near the batteries. Batteries release explosive gas while you charge them. Charge the batteries in a well-ventilated area. If you do not obey, there is a risk of death or serious injury. SJ6832 RTE 221844ACAI...

  • Page 37: Hydraulic Compartment

    Make sure there is no visible damage or parts and there is no visible damage. ▪ hydraulic leaks. Make sure all electrical connections are tight. ▪ Hydraulic oil level Make sure the platform is fully lowered and the ▪ outriggers are retracted. SJ6832 RTE 221844ACAI...

  • Page 38: Platform Assembly

    3. Use the MEWP ladder to exit the platform. Make sure that the gate is in good condition ▪ and operates correctly. Fall-protection anchorages Make sure that the fall-protection anchorages ▪ are correctly installed. Make sure there is no visible damage. ▪ SJ6832 RTE 221844ACAI...

  • Page 39: Lift Mechanism

    Make sure all the pins and fasteners are ▪ correctly installed. Make sure that the cables and wires have the ▪ correct routing, and show no signs of wear and/or physical damage. SJ6832 RTE 221844ACAI...

  • Page 40: Function Tests

    4. Move and hold the lower/neutral/raise 5. Move and hold the lower/neutral/raise switch switch to the raise position. in the raise position. Result: The platform does not rise. ▪ Result: The platform does not raise. ▪ SJ6832 RTE 221844ACAI...

  • Page 41: Do A Test Of The Platform/Off/Base Key Switch

    6. Press and turn the manual override knob of the to the base position holding valve clockwise until it stops to restore 2. Move and hold the lower/neutral/raise switch normal operation. in the raise position. Result: The platform raises. ▪ SJ6832 RTE 221844ACAI...

  • Page 42: Do A Test Of The Hybrid Power Pack (Hpp) From The Base (Optional Equipment)

    6. Move the inclined-drive/level-drive switch the inclined-drive position. 7. Move the lift/off/drive switch to the drive position. 8. Squeeze and hold the function-enable switch 9. Push the controller handle to drive forward. Result: The drive function does not operate. ▪ SJ6832 RTE 221844ACAI...

  • Page 43: Do A Test Of The Function-Enable Switch

    . 3. Squeeze and hold the function-enable switch for 7 seconds. 4. Slowly push the controller handle to move the MEWP in the forward direction. Result: The MEWP does not move in the ▪ forward direction. SJ6832 RTE 221844ACAI...

  • Page 44: 13 Do A Test Of The Brakes

    A service technician must 4.3-15 Do a test of the horn do a check on the brake adjustments. 1. Press the horn button Result: The horn makes a sound. ▪ SJ6832 RTE 221844ACAI...

  • Page 45: 16 Do A Test Of The Lowering Warning System

    6. Squeeze and hold the function-enable switch Result: The MEWP drives slower than when it ▪ was in the lowered travel position. 7. Pull the controller handle to continue to lower the MEWP . Result: The platform fully lowers. ▪ SJ6832 RTE 221844ACAI...

  • Page 46: 18 Do A Test Of The Sgle Switch (Optional Equipment)

    ▪ 3. Push and hold the SGLE button only. Do not squeeze the function-enable switch . Push and pull the controller handle to raise or lower the platform. Result: The platform does not raise or lower. ▪ SJ6832 RTE 221844ACAI...

  • Page 47: 19 Do A Test Of The Outrigger Interlocks (Optional Equipment)

    6. Move and hold the auto level switch in the retract position to fully retract all four outriggers. Result: All four outriggers fully retract. ▪ 7. Move and hold the auto-level enable switch in the enable position. SJ6832 RTE 221844ACAI...

  • Page 48: 20 Do A Test Of The Auto-Level (Optional Equipment)

    2. Move and hold the auto-level enable switch in the enable position. 3. Move and hold the auto level switch in the extend position to extend the outriggers until all four outriggers are on the ground and the platform is level. SJ6832 RTE 221844ACAI...

  • Page 49: 21 Do A Test Of The Hybrid Power Pack (Hpp) From The Platform (Optional Equipment)

    (HPP) from the platform (optional equipment) 1. Move the HPP on/off switch to the on position. Result: The HPP starts. ▪ 2. Move the HPP on/off switch to the off position. Result: The HPP turns off. ▪ SJ6832 RTE 221844ACAI...

  • Page 50: Operator's Checklist

    Each item shall be inspected using the appropriate section PASS NOT APPLICABLE of the Skyjack operating manual. As each item is inspected, Add a comment if the item does not pass inspection. check or complete the appropriate box. Comment (if item does not pass inspection)
  • Page 51 Do a test of the auto-level (optional equipment) Do a test of the Hybrid Power Pack (HPP) from the platform (optional equipment) 1950AA NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print. SJ6832 RTE 221844ACAI...
  • Page 52 Notes SJ6832 RTE 221844ACAI...

  • Page 53: Section 5 - Operation

    It is locked and tagged for servicing or repair ▪ It was modified without permission from ▪ Skyjack and the MEWP owner. If you do not obey, there is a risk of death or serious injury. WARNING Fall Hazard. Use the three points of contact principle when you use the MEWP ladder to enter or exit the platform.

  • Page 54: Raise Or Lower The Platform With The Base Control Console

    If you do not obey, there is a risk of death or serious injury. 4. Use the MEWP ladder to enter the platform. 5. Close the gate. 6. Pull the emergency-stop button on the platform control console. SJ6832 RTE 221844ACAI...

  • Page 55: Raise Or Lower The Platform With The Platform Control Console

    1. Fully lower the platform immediately. 2. Make sure the MEWP is on a firm, level surface. If you do not obey, there is a risk of death or serious injury. SJ6832 RTE 221844ACAI...

  • Page 56: Select The Level-Drive Or Inclined-Drive Mode

    (low speed/high torque) position. the MEWP . WARNING Push the emergency-stop button when you are at the necessary location or elevation. This prevents unintended MEWP movement. If you do not obey, there is a risk of death or serious injury. SJ6832 RTE 221844ACAI...

  • Page 57: Extend/Retract The Extension Platform

    6. Pull the controller handle to lower the platform. NOTE The SGLE does not have an effect on these functions: lower, drive, steer, auto-level, or emergency-lowering. 7. Release the controller handle until it goes back to the center position to stop. Release the function-enable switch. SJ6832 RTE 221844ACAI...

  • Page 58: Use The Auto-Level (Optional Equipment)

    MEWP is not level, or Flashing quickly there is an outrigger or auto- level function error. The outriggers are extended and the MEWP is level. The light is on while the auto-level function is active only. SJ6832 RTE 221844ACAI...

  • Page 59: Use The Hybrid Power Pack (Hpp) (Optional Equipment)

    6. Move the HPP on/off switch on the platform control console to the on position. Result: In manual mode, the HPP starts. In ▪ automatic mode, the HPP automatically starts when the battery falls below 50% charge. SJ6832 RTE 221844ACAI...
  • Page 60 Notes SJ6832 RTE 221844ACAI...

  • Page 61: Section 6 - Additional Procedures

    8. Pull and hold the emergency-lowering valve to lower the platform. 9. Press and turn the override knobs of each holding valve clockwise until it stops to restore normal operation. Figure 03 Emergency-lowering system SJ6832 RTE 221844ACAI...

  • Page 62: Release The Brakes Manually

    4. Push the plunger of the brake auto-reset valve on the main manifold in the hydraulic compartment. 5. Continuously push and release the knob the hand pump until you feel firm resistance. The brake is released. SJ6832 RTE 221844ACAI...

  • Page 63: Charge The Batteries

    WARNING Electrocution hazard. Do not touch parts of the charger output wires that are not insulated, the battery connector, or the battery terminals. If you do not obey, there is a risk of death or serious injury. SJ6832 RTE 221844ACAI...
  • Page 64 Green Equalization pulse and floating Green flash Connection with CanConsole or Green and red S/S HW-SW flash together NOTE Push the MODE button to pause the parameter sequence. To continue the sequence, push the MODE button again. SJ6832 RTE 221844ACAI...

  • Page 65: Move The Mewp For Transport

    Park the transport vehicle on a level surface. Use wheel chocks or blocks to prevent unintended vehicle movement during this operation. Figure 04 Forklift lift locations ������ ������� � �������� 124631AC Figure 05 MEWP Center of Gravity SJ6832 RTE 221844ACAI...

  • Page 66: Hoist The Mewp

    MEWP , front to back and side to side. Refer to Figure Vertically, the center of gravity is approximately a small distance above the chassis. Figure 06 Appropriate method to hoist SJ6832 RTE 221844ACAI...

  • Page 67: Drive And Tie-Down The Mewp

    Fall Hazard. Use the three points of contact principle when you use the MEWP ladder to enter or exit the platform. If you do not obey, there is a risk of death or serious injury. 2. Use the MEWP ladder to enter the platform. SJ6832 RTE 221844ACAI...

  • Page 68: Operate The Mewp From The Ground

    6. Stay behind or to the side of the MEWP . 7. Move the inclined-drive/level-drive switch to the inclined-drive position. 8. Use as low a speed as practical to drive the MEWP forward to the necessary location. SJ6832 RTE 221844ACAI...

  • Page 69: Move The Mewp Through A Doorway

    If you do not obey, there is a risk of death or serious injury. 16. Use the MEWP ladder to exit the platform. 17. Connect the platform control console cable to the electrical connector below the platform. SJ6832 RTE 221844ACAI...
  • Page 70 20. Return the guardrails to the vertical position if folded. Refer to for the procedure on section 6.8 how to fold the guardrails. SJ6832 RTE 221844ACAI...

  • Page 71: Fold The Guardrails

    7. Make sure you fully retract the extension can result in death or serious injury. platform. 8. Remove the lock-pins from the control console mounting bracket. Put the platform control console and outrigger/generator control console down on the platform floor. SJ6832 RTE 221844ACAI...
  • Page 72 10. Move the front guardrail to the right extension. guardrail. 19. Fold down the left side guardrail. 20. With the gate closed, remove all the locking pins on the entrance side guardrail. 21. Fold down the entrance side guardrail. SJ6832 RTE 221844ACAI...

  • Page 73: Unfold The Guardrail System Up

    12. Put in all locking pins to lock the right side guardrail in position. 13. Unfold the left-side extension guardrail. 14. Put in the locking pin to lock the left-side extension guardrail in position. 15. Unfold the right-side extension guardrail and the front guardrail. SJ6832 RTE 221844ACAI...

  • Page 74: Use The Maintenance Support

    WARNING Crush hazard. Do not put parts of your body through the scissor assembly unless the maintenance support is correctly deployed. If you do not obey, there is a risk of death or serious injury. SJ6832 RTE 221844ACAI...

  • Page 75: Deploy The Maintenance Support

    2. Raise the platform until there is adequate 7. Discard the wipes or rags in an approved clearance to retract the maintenance support. 3. Retract the maintenance support into the storage bracket. 4. Fully lower the platform. SJ6832 RTE 221844ACAI...
  • Page 76 Notes SJ6832 RTE 221844ACAI...

  • Page 77: Section 7 - Technical Specifications

    Section 7 – Technical Specifications 7.1 Standard and optional equipment Models SJ6832 RTE Standard Equipment Platform controls Base controls Manual extension platform Load sensing system AC socket on platform Tilt sensing system with alarm and drive/lift cutout Scissor guards Disc brakes...

  • Page 78: Owner's Annual Inspection Record

    6 months. If you do not obey, there is a risk of death or serious injury. IMPORTANT The Owner’s Annual Inspection Record on the scissor assembly must be filled out after an annual inspection is completed. SJ6832 RTE 221844ACAI...

  • Page 79: Specifications

    Specifications Section 7 – Technical Specifications 7.3 Specifications Models SJ6832 RTE Weight (Without Outriggers)* 3780 kg Weight (With Outriggers)* 3845 kg Overall Width 1.765 m Overall Length (Platform Retracted) 2.720 m Overall Length (Platform Extended) 4.110 m Platform Length, Inside (Platform Retracted) 2.440 m...

  • Page 80: Maximum Platform Capacities (Evenly Distributed)

    454 kg 4 Persons 136 kg 1 Person 400 N 2.5° x 4.5° SJ6832 RTE 12.5 m/s 1951AA NOTE Occupants and materials are not to exceed the rated load. Refer to the capacity label at the sides of the platform for additional information and models equipped with options.

  • Page 81: Floor Loading Pressure

    WARNING Do not use tires other than the tires that Skyjack specifies for this MEWP . Do not mix different types of tires or use tires that are not in good condition.

  • Page 82: Ec Declaration Of Conformity

    7.7 EC Declaration of Conformity SJ6832 RTE 221844ACAI...

  • Page 83: Section 8 - Labels

    Section 8 – Labels DANGER. Orange WARNING. Yellow CAUTION. Green Emergency- lowering Procedure. Blue Safety Information. SJ6832 RTE 221844ACAI...

  • Page 84: Electrical Compartment

    Select to raise or to lower the platform. Select to enable platform controls, or to enable the base control console. Select the off position to disconnect power to all circuits. Select the on position to operate any circuit. SJ6832 RTE 221844ACAI...
  • Page 85 No pressure washer Do not use a pressure washer. ���������� Battery cover lock Turn the know to the left to unlock the battery tray cover. Turn the knob to the right to lock the battery tray cover in place. SJ6832 RTE 221844ACAI...

  • Page 86: Right Side

    Section Manual storage box Shows the location of the operation manual. Note: This label is inside the platform. Skyjack logo Model number* Product Identifier *Model number will vary and may not be as shown. Caution tape stripe SJ6832 RTE 221844ACAI...
  • Page 87 Model number* Product Identifier *Model number will vary, may not be as shown. Tip-over hazard Use Skyjack approved, matched solid tires only. Do not use air or foam-filled tires. Wheel specifications Refer to the service manual for wheel type and torque.
  • Page 88 Make sure the MEWP has received an annual inspection before operation. Forklift lift location Insert fork fully into forklift lift location to lift the MEWP . CE mark Elevate™ Trackunit (optional equipment) This MEWP has added functionality. 221111 SJ6832 RTE 221844ACAI...
  • Page 89 MEWP identification and specifications. *The serial plate information changes with different MEWPs. BAR CODE QR code This code gives you fast access to the MEWP documentation, and the live MEWP data supplied by ELEVATE telematics (optional equipment). SJ6832 RTE 221844ACAI...

  • Page 90: Front Side

    Section 8 – Labels Front side 8.3 Front side Description Label Pictorial Skyjack logo Caution tape stripe �� Maintenance support Deploy maintenance support here. ���������� Lift and tie-down points Only use these points for lifting or tying down. SJ6832 RTE 221844ACAI...
  • Page 91 5. Turn Main power disconnect switch to on position. 6. Raise platform until there is adequate clearance to swing up maintenance support. 7. Swing maintenance support up and place into storage bracket. 8. Ensure platform is fully lowered. SJ6832 RTE 221844ACAI...
  • Page 92 3. To lower the platform, pull out emergency lowering valve located on the outside of the hydraulic tray. SJ6832 RTE 221844ACAI...

  • Page 93: Left Side

    Section 8 – Labels 8.4 Left side Description Label Pictorial Skyjack logo Model number* Product Identifier *Model number will vary, may not be as shown. Caution tape stripe Stay away Stay away from the MEWP when it is in operation. SJ6832 RTE 221844ACAI...
  • Page 94 Left side Left side (continued) Description Label Pictorial Tip-over hazard Use Skyjack approved, matched solid tires only. Do not use air or foam-filled tires. Wheel specifications Refer to the service manual for the wheel type and torque. Wheel load* Shows the maximum load applied to the ground by the specified wheel.
  • Page 95 8. Block or chock wheels to prevent MEWP from rolling. 9. Reset brake by pulling out black knob. 10. Close free-wheeling valve by turning it clockwise. Forklift lift location Insert fork fully into forklift lift location to lift the MEWP . SJ6832 RTE 221844ACAI...
  • Page 96 3. To lower the platform, pull out emergency lowering valve located on the outside of the hydraulic tray. CE mark SJ6832 RTE 221844ACAI...

  • Page 97: Hydraulic Compartment

    Hydraulic compartment Section 8 – Labels 8.5 Hydraulic compartment Description Label Pictorial �� Hydraulic oil ATF Dexron III Only replace the hydraulic fluid with ATF Dexron III. �������������� ������������� ���������� SJ6832 RTE 221844ACAI...

  • Page 98: Rear Side

    Refer to the operation manual. Do the visual inspections and function tests before you start each work shift. Refer to section 4.4. No jewelry Caution. Do not wear jewelry or loose clothing that could become caught or entangled. SJ6832 RTE 221844ACAI...
  • Page 99 This MEWP is not electrically insulated and does not provide protection from contact with or proximity to energized electrical conductors. Follow for the minimum distance to section 2.1-1 keep between all parts of the MEWP , occupants, or tools, and the electrical conductors. SJ6832 RTE 221844ACAI...

  • Page 100: Platform View

    **The rating changes between different units. Fall protection anchorage When required, attach the body-harness lanyards of each occupant to the fall-protection anchorage points. Rated for one (1) person for each anchorage point. SJ6832 RTE 221844ACAI...
  • Page 101 Label Pictorial Warning - Fall hazard (vertical) Make sure the hinged railing is locked with lock-pins. Connect AC supply Connect AC supply here. Connect air supply (optional equipment) �� ������� ������� Connect platform air supply here. ���������� SJ6832 RTE 221844ACAI...

  • Page 102: Platform Control Console

    (low torque). Select either incline drive or level drive mode. Push to sound the horn. Push to disable the controls (emergency stop). The light indicates the controls are enabled. Read the operating manual. SJ6832 RTE 221844ACAI...

  • Page 103: Lift Cylinders

    8.9 Lift cylinders Description Label Pictorial Orifice installed Make sure the orifice is installed. Warning - deploy maintenance support(s) Do not do maintenance or inspections in the scissor assembly unless the maintenance support(s) are deployed. Refer to section 6.9 SJ6832 RTE 221844ACAI...

  • Page 104: Outriggers (Optional Equipment)

    Do not tamper with or disable the limit switches or other safety devices. �� Outrigger load (optional equipment) Indicates rated outrigger load. � � � � �� � � � � � � �� � � ���������� SJ6832 RTE 221844ACAI...

  • Page 105: Outrigger And Generator Control Console (Optional Equipment)

    Solid: The outriggers are extended and the platform is level. ▪ Automatic outrigger control console Select to retract all outriggers or to extend all outriggers with ▪ automatic leveling. Select to enable manual or automatic outrigger controls. ▪ SJ6832 RTE 221844ACAI...

  • Page 106: Hybrid Power Pack (Hpp) (Optional Equipment)

    Hot surface Do not touch. Diesel Only use low or ultra-low sulfur diesel. AC battery charging - HPP Turn off the HPP before connecting an AC supply to charge. Do not smoke Do not smoke near this location. SJ6832 RTE 221844ACAI...
  • Page 107 �� No pressure washer Do not use a pressure washer. ���������� Power circuit breaker Push to reset the power circuit breaker. �� �� ���������� Circuit breaker reset Push to reset the ground circuit breaker. �� �� ���������� SJ6832 RTE 221844ACAI...
  • Page 108 Notes SJ6832 RTE 221844ACAI...

  • Page 109: Section 9 - Unique Skyjack Features

    Having equipment with features and functionality that allow you and your customers to do more is a vital part of the utilization equation. Skyjack offers a range of accessory products to expand a MEWP’s functionality and your power to offer a truly flexible rental choice.
  • Page 110 Notes SJ6832 RTE 221844ACAI...
  • Page 112 www.skyjack.com...

Table of Contents