Pci Hot Plug Support - Intel XL710-Q2 User Manual

Finisar SFP+ SR bailed, 10g single rate
Avago SFP+ SR bailed, 10g single rate
Finisar SFP+ LR bailed, 10g single rate
Molex 1m - Twin-ax cable
Molex 3m - Twin-ax cable
Molex 5m - Twin-ax cable
Molex 10m - Twin-ax cable
Tyco 1m - Twin-ax cable
Tyco 3m - Twin-ax cable
Tyco 5m - Twin-ax cable
Tyco 10m - Twin-ax cable
THIRD PARTY OPTIC MODULES AND CABLES REFERRED TO ABOVE ARE LISTED ONLY FOR THE PURPOSE OF HIGHLIGHTING THIRD
PARTY SPECIFICATIONS AND POTENTIAL COMPATIBILITY, AND ARE NOT RECOMMENDATIONS OR ENDORSEMENT OR SPONSORSHIP OF
ANY THIRD PARTY'S PRODUCT BY INTEL. INTEL IS NOT ENDORSING OR PROMOTING PRODUCTS MADE BY ANY THIRD PARTY AND THE
THIRD PARTY REFERENCE IS PROVIDED ONLY TO SHARE INFORMATION REGARDING CERTAIN OPTIC MODULES AND CABLES WITH THE
ABOVE SPECIFICATIONS. THERE MAY BE OTHER MANUFACTURERS OR SUPPLIERS, PRODUCING OR SUPPLYING OPTIC MODULES AND
CABLES WITH SIMILAR OR MATCHING DESCRIPTIONS. CUSTOMERS MUST USE THEIR OWN DISCRETION AND DILIGENCE TO PURCHASE
OPTIC MODULES AND CABLES FROM ANY THIRD PARTY OF THEIR CHOICE. CUSTOMERS ARE SOLELY RESPONSIBLE FOR ASSESSING
THE SUITABILITY OF THE PRODUCT AND/OR DEVICES AND FOR THE SELECTION OF THE VENDOR FOR PURCHASING ANY PRODUCT. THE
OPTIC MODULES AND CABLES REFERRED TO ABOVE ARE NOT WARRANTED OR SUPPORTED BY INTEL. INTEL ASSUMES NO LIABILITY
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF SUCH THIRD PARTY
PRODUCTS OR SELECTION OF VENDOR BY CUSTOMERS.

PCI Hot Plug Support

Intel® PRO/100 Server Adapters and most Intel® Gigabit Server Adapters are enabled for use in selected
servers equipped with Hot Plug support.Exceptions: Intel Gigabit Quad Port Server adapters do not support
Hot Plug operations.
If you replace an adapter in a Hot Plug slot, do not place the removed adapter back into the same network until
the server has rebooted (unless you return it to the same slot and same team as before). This prevents a
conflict in having two of the same Ethernet addresses on the same network.
The system will require a reboot if you
Change the primary adapter designator.
l
Add a new adapter to an existing team and make the new adapter the primary adapter.
l
Remove the primary adapter from the system and replace it with a different type of adapter.
l
FTLX8571D3BCL
AFBR-700SDZ
FTLX1471D3BCL
74752-1101
74752-2301
74752-3501
74752-9004
2032237-2
2032237-4
2032237-6
1-2032237-1