Maintenance Schedule - OHASHI ES72G Operation Manual

REGULAR MAINTENANCE

Maintenance Schedule

Clean air cleaner.
Check engine and transmission oil level, cleanliness and
for any spillage.
Check for cracks and / or wear on the knives.
Clean engine and rubber crawlers.
Retighten the bolts and nuts of the knives and at each
place.
Check fuel level and for any spillage.
Grease lubrication points.
Lubricate all wire and lever supporting points and any
friction.
Check for cracks and / or wear of belts and chains.
Check turning control levers.
Check rotor clutch.
Check all machine safety covers, guards and housing are
closed and fitted securely.
Test Safety Bar is working properly.
Check rubber crawler tension.
Sharpen the chipper knives.
Check and cleaning of spark plug.
Check and cleaning of fuel cock.
Sharpen the counter knife.
Replace chipper knives.
Replace counter knives.
Change engine oil.
Change transmission oil.
Check transport clutch and parking brake.
Replace fuel lines.
Service engine.
*1 First 100 hours of operation.
*2 First 20 hours of operation.
*3 First 50 hours of use in transportation. After every 200 hours of use in transportation.
50
Daily
hours
(Refer to "Lubrication Chart")
(Refer to "Lubrication Chart")
(Adjust first 10-20 hrs.)
Every 3 months
Every 1000 hours (or when necessary)
(Refer to the engine manual)
- 42 -
200 300
hours hours
(*1)
(*2)
(*3)
800
hours