OHASHI ES72G Operation Manual page 19

Wood chipper
Table of Contents

Advertisement

HOW TO DRIVE THE MACHINE
CAUTION 1
Prevent materials getting caught between the
crawler wheels and crawler tracks or damage
to the transmission may occur.
1. Ensure brake handle is down is up.
2. Move the throttle lever to LOW
2. Place shift lever in Forward or Reverse.
N
F
3. Hold the brake handle down and adjust throttle.
CAUTION 2
When the brake handle is up, the
parking brake is engaged automatically.
When the brake handle is held down, the
parking brake is disengaged automatically.
CAUTION 3
Because the brake handle is connected
with the parking brake, it is sometimes
hard to move the shift lever.
CAUTION 4
When moving the shift lever from Forward
to Reverse allow the brake handle to move up.
R
- 16 -
HOW TO STOP THE MACHINE
1. Turn the throttle lever to the LOW position
and slow down the machine speed.
2. At a flat area release the brake handle up.
3. Switch the engine switch to OFF.
4. Close the fuel cock.
OFF
ON
CLOSE
OPEN

Advertisement

Table of Contents
loading

Table of Contents