OHASHI ES72G Operation Manual page 12

DECALS
20
FEED ROLLER
21
SAFETY WEAR
22 FEED MATERIALS
23 CUTTING & CHIP PROJECTILE
If caught in the feed roller serious injury will
occur.
Do not place your hands, feet or any other body
part near the feed rollers.
Do not attempt to climb into or on the lower edge
of the hopper or you may be caught in the feed
roller.
Read the user manual, and wear helmet, ear
protectors, eye protectors, gloves and non-snag
clothing before using the machine.
The machine is only designed to chip organic
material like wood.
Do not place sand, dirt, metal, stones, plastic,
rope, clothing, cardboard, books, newspapers
rubber, glass or any other non-wood material
into the hopper to be chipped or damage will
occur to the machine.
Moving parts may cut flesh and cause serious
injury. Feed material occasionally projected out
of the hopper can cause injury.
Do no place hands or body parts near the area
where moving parts may cut flesh and cause
injury. Do not remove covers while the machine
is on or moving parts have not stopped.
Do not stand in front of the hopper while the
machine is processing feed material. Stand to
the side to avoid being struck by feed material
that occasionally projects out of the hopper.
- 9 -