OHASHI ES72G Operation Manual page 10

DECALS
12
MUFFLER
CRUSHING RISK
13
LOADING & UNLOADING
14
SLOPE STABILITY 1
15
The muffler is hot during and after operation. Do
not touch or a burn injury may occur.
Even after use the muffler may remain hot.
Wait until the machine cools down before making
any contact with the muffler.
Be careful to avoid being crushed by the machine.
Be careful not to have your feet or other body parts
crushed under the moving crawlers.
Be careful not to be crushed while driving the
machine between the machine and another object.
Be careful not to drive the machine at a dangerous
speed on a slope or on a slope which is too steep
or the machine may tip and crush you.
Load and unload the machine in the correct
manner or injury may occur.
When loading or unloading the machine onto a
truck, trailer, van or higher platform using ramps
do not stand on the downward side of the machine.
Always stand upward from the machine in the
higher position so that if the machine rolls or
tumbles you are in a safe position.
Only drive the machine up/down a slope of
18° or less.
When unloading or loading or when driving the
machine anywhere do not drive the machine on
a slope of more than 18° in a straight up or down
direction on the slope.
- 7 -