Servicing After Operation/Long Term Storage - OHASHI ES72G Operation Manual

SERVICING AFTER OPERATION/LONG TERM STORAGE

SERVICING AFTER OPERATION
1. Follow the following steps to prepare for servicing
and maintenance.
(a) Ensure the brake handle is up.
(b) Move the rotor clutch lever to OFF position
(c) Turn the fuel cock to CLOSE position.
Components to clean.
(1) Hopper
(2) Feed rollers
(3) Rotor housing
(4) Rubber crawlers
CAUTION
Do not use water to clean the components near the
engine, oil reservoir or electronic components. Use
compressed air, a brush or cloth to clean dirt, dust
and debris from these sections.
1. Wash the machine after use on the same day.
2 After washing, let the washed areas dry
naturally and completely. After drying them
out, lubricate the rotating and sliding parts
with adequate amount of lubrication oil.
3. Pour oil and lubricant on and in all other parts of the
machine that require it per the lubrication chart.
- 37 -