Table of Contents
Advertisement
FEED ROLLER OPERATION
DANGER
1. Do not place hands or feet near the feed roller
at any time.
2. Do not attempt to remove materials stuck in
the feed roller directly with your hands.
3. Ensure that the machine and engine parts have
stopped when removing stuck materials from
the feed roller.
4. Do not place hands near the feed box while
the feed roller is operating as sudden
movements may cause injury.
DANGER
DANGER
■ DO NOT TOUCH FEED BOX/ROLLER BY HAND(S).
■ IF NEEDED, USE THE WOODEN ROD.
5. Do not place hands near the feed roller while
feeding material into the hopper. Be very
careful not to be caught in the feed roller.
6. Do not place your hands into or near the
dispatch unit while the engine is running.
1. Switch the feed switch to START so that
the feed roller starts rotating.
Feed Switch
STOP
2. Switch the feed switch to STOP so that the
feed roller stops.
START
- 20 -
FEED ROLLER SAFETY BAR
The feed roller saftey bar allows the user to stop the
feed roller in an emergency and if necessary without
using their hands (as shown below).
FEED ROLLER
SAFETY BAR
CAUTION 1
Before machine use, check that the feed roller safety
bar when engaged halts the movement of the feed
rollers. If when engaged (pushed in) the feed rollers
do not stop, contact your dealer to repair the device
immediately.
ENGAGE FEED ROLLER SAFETY BAR
1. After starting the engine, putting the engine to full
throttle and putting the rotor clutch to ON, check
that the feed switch is in the START position.
2. Push the feed roller safety bar in (toward the rotor)
and check that the feed roller has stopped.
PUSH IN SAFETY BAR
Advertisement
Table of Contents
