Table of Contents
Advertisement
REGULAR MAINTENANCE
3. Replacement of Rotor Belt
In the case where adjustments of the engine position,
and / or the rotor arm spring do not result in the
correct tension of the rotor belt and / or the rotor
belt is damaged or frayed, replace the rotor belt.
a) Shift the rotor clutch lever to the OFF position.
b) Remove the front, center and rear covers on the
right hand side.
c) Place the spring hook attached to the rotor arm
in the bottom hole so that the tension of the
rotor belt is weakest.
d) Loosen and remove the M10 bolts x 4
attaching the engine to the machine frame.
e) Remove the bolts (M10) fixing the rotor belt holder
and remove the rotor belt holder and the rotor belt.
f) Place a new rotor belt in the position around the
rotor and engine pulleys and refit the rotor belt holder.
g) Adjust the belt tension according to the item
2. Re-tensing of the rotor belt.
4. Disengagement of the rotor clutch
Reattach safety covers securely and use the
transparent window to view the rotor belt.
a) Shift the rotor clutch lever to the OFF position.
b) Turn the fuel cock to the OPEN position.
c) Start the engine and locate the throttle lever
to the full throttle.
d) Shift the rotor clutch lever from the OFF to the
ON gradually.
e) Repeat ON and OFF action of clutch lever and
check that when ON the rotor belt moves and
when OFF the belt stops moving immediately.
f) If not, stop the engine, close the fuel cock,
re-adjust the wire and rotor arm spring and
re-tense the rotor belt as per item 1 and 2
above.
g) When the adjustment is completed, place
the covers on the machine and fit tightly.
CAUTION
If letters are printed on the rotor belt, attach
the rotor belt to the pulleys so that the
written sentence begins at the direction of
the engine pulley and ends in the direction of
the rotor pulley.
FEED ROLLER CHAIN
Regularly apply oil to the feed chain or
the chain can become loose and damaged
If there is any considerable dirt or things
attached to the chains remove them before
oiling.
Use machine oil SAE20.
If the chain becomes partly detached, reattach.
When the chain becomes damaged to the
point it can no longer be used, replace.
- 30 -
Advertisement
Table of Contents
