Safety Instructions - OHASHI ES72G Operation Manual

Wood chipper
Table of Contents

Advertisement

SAFETY INSTRUCTIONS

CAUTION
1. This operation manual must be retained within
easy access of operators. Operators must be
careful not to lose or damage the operation
manual.
2. If the operation manual is missing or illegible
due to damage, obtain new one from our
dealers and retain it within easy access.
3. If the machine discussed in this operation
manual is rented, be sure to provide the manual
with the machine. Let the renter read and
understand the manual. Give new operators
proper instructions and training before they
start operating the machine.
4. If the machine is transferred to other people,
make sure that this operation manual is
provided with the machine.
CAUTION
1. Operators of this machine must read and
understand the contents of this operation
manual before attempting to operate it.
2. If safety decals are torn and illegible, obtain
new ones from our dealers and replace them.
1. Read through this operation manual and make
yourself familiar with the operation, servicing and
maintenance of this machine before use.
2. Never operate the machines without repairing or
replacing the deformed or defective parts.
3. Never alter or modify this machine.
4. The machine cannot be towed on crawlers on
a public road. Extended towing on crawlers
will damage machine.
5. If towing very short distances on crawlers
at no more than allowable top speed of
gear in use, always tow using a vehicle
with enough driving and braking force. Be
very careful on slopes.
6. When a machine is loaded/unloaded on/from
truck or trailer for transport, stop the truck on
a level surface, engage the truck's parking
brake, and position it securely with
wheel stoppers. Extreme caution must
be taken not to topple the machine from
the ramps or truck. (refer "Loading, Unloading &
Slopes")
7. Never operate the machine alone. This
machine must be operated by two or more
operators.
8. Never attempt to touch the muffler and
surroundings during operation because it
becomes very hot.
9. Don't directly touch the feed roller or
its attaching portions.
10. Do not insert your fingers into the shooter
or low dispatch unit. Your hands might be
caught in the rotor and this could cause
serious injury.
11. Gasoline is extremely flammable.
Extreme caution must be taken when handling
the fuel.
(1) Use only fresh, clean gasoline.
(2) Use an approved fuel container for the fuel
tank. Fuel container's outlet must fit the
fuel tank's inlet. Check to see if these
ports fit. If not, use a suitable fuel pump.
(3) Do not remove the fuel tank cap or add fuel
while the engine is running or hot.
(4) Do not fill the fuel tank indoors.
(5) Wipe off any spilled fuel.
(6) Do not use gasoline as a cleaning fluid.
(7) Never smoke while handling gasoline.
(8) Do not handle fuel near a naked flame or
uncovered electric light.
(9) Keep the fuel container away from open
flames and equipment that may spark.
12. Wait until the machine has cooled before
storing indoors and remove key.
13. When performing maintenance with two or
more people stay aware of each others
location by talking to avoid accidents.
14. Remove chips or other material in and around
the crawlers as this could cause
transmission troubles.
15. Never perform chipping operations inside
a building.
- 1 -

Advertisement

Table of Contents
loading

Table of Contents