Table of Contents
Advertisement
SERVICING AFTER OPERATION/LONG TERM STORAGE
LONG TERM STORAGE
1. Pour oil and lubricant on and in all other parts of the
machine that require it per the lubrication chart after
washing.
2. Drain the fuel from the fuel tank, following
the steps described below.
(a) Turn the fuel cock to CLOSE
position.
(b) Clean and empty the fuel cup and strainer.
per "Inspection and cleaning of the fuel cock".
(c) Place an oil pan beneath the fuel cock.
Turn the fuel cock to OPEN,
and let the fuel drain from the fuel tank.
(d) Replace the strainer cup.
3. Start engine and run it until the no more fuel remains.
4. Change the engine oil.
5. Clean the element of the air cleaner and replace it.
6. Run the engine once a month and make the
lubricating oil circulate in the engine.
7. Clean each components of the machine with oil
cloth. Cover the machine to protect it and
keep it clean. Store the machine in a clean,
dry storage area.
CAUTION
In the cold area, mud or other obstacles stuck on
the machine must be removed immediately after
finishing the operation. Frozen obstacles cause
machine trouble. Store the machine on the
concrete or treated wood planks. If the machine
would not run due to freeze, do not try to make
the machine run. Use boiled water and wait until
the parts could be defrosted. If the machine is
moved forcibly under the above condition and
machine damage may happens, we,
manufacturer, do not take any responsibility for
the damage.
ACCESSORY TOOL LIST
Check if you have all accessory tools needed.
NO
Name
1
Box spanner
2
Screw driver
3
150mm scale
Part No.
Qty
KN12007AA
1
KN13001AA
1
1
−
- 38 -
Advertisement
Table of Contents
