Optional Digital Remote Control; Overview; Functions; Connection - Martin JEM Compact Hazer Pro User Manual

Optional Digital Remote control

O v e r v i e w
The JEM digital remote control, optionally available, may be used for remote
control of the JEM Compact Hazer Pro. Several machines may be controlled
from one remote using the LINK function (see page 13).
XLR socket
XLR socket
(on rear)
F u n c t i o n s
The remote control provides the following functions:

Haze button: turns haze output on and off. Press once to start haze and
again to stop.

Timer button: turns the haze timer on and off.

Haze level setting (HAZE = 0 -100%)

Fan speed setting (FAN = 0 -100%)

Timer run time/off time settings (TRUN = 1 -90 seconds, TOFF = 20-89
seconds)

Run mode (RUN = OFF, STBY, FAN, TIME, CONT)
The functions are the same as on the built in control panel and are described on
page 13.
The RUN menu duplicates the functions of the Haze and Timer buttons. The
buttons are simply a quick way to control this menu function.
C o n n e c t i o n
The remote control has two identical XLR sockets on the top and back for
connection to the JEM Compact Hazer Pro. Plug the cable provided with the
remote control into one of these sockets and into the 3-pin XLR socket on the
rear panel of the JEM Compact Hazer Pro.
The remote control is powered through its cable by the JEM Compact Hazer Pro;
no batteries are required.
The cable may be extended to up to 25 m (82 ft.) with a 3-pin XLR DMX cable.
16
Haze button
Optional Digital Remote control
Display
Timer button