3. SETTING FOR COMMUNICATION
2. Set the device address. Press the UP key to enter "5" in the lowest digit.
3. Press the <R/S key to brightly light the tens digit.
4. Press the UP key to enter "1" in the tens digit.
5. Press the SET key to select the next communication parameter. As a result, the set device
address is registered.
8
PV
SV
AT
OUT1
OUT2
ALM1
R/S
SET
PV
SV
AT
OUT1
OUT2
ALM1
SET
R/S
PV
SV
AT
OUT1
OUT2
ALM1
R/S
SET
ALM2
ALM2
ALM2
IMCB03-E3
Need help?
Do you have a question about the CB100 and is the answer not in the manual?