Headlights: Engine-Forward; Replacing Headlight Bulb - MacDon M205 Operator's Manual

5. Remove the plastic caps from the battery posts.
6. Attach the red positive (+) cable terminals to the
positive posts (A) on the batteries and tighten clamps.
Reposition plastic covers onto clamps.
7. Attach the black negative (–) cable terminals to the
negative posts (B) on the batteries and tighten clamps.
Reposition plastic covers onto clamps.
8. Turn the battery switch to the POWER ON position.
9. Close the platform. Refer to
(Standard Position), page

5.9.3 Headlights: Engine-Forward

Replacing Headlight Bulb

Replacement bulb: MD #110267 (H4 12V 60/55W)
1. Remove two screws (A) and remove headlight
assembly from hood.
2. Pull wiring harness connector off the headlight
assembly and remove rubber insulator boot (A).
214603
MAINTENANCE AND SERVICING
5.3.2 Closing Platforms
289.
Figure 5.127: Batteries
Figure 5.128: Headlight
A
Figure 5.129: Headlight Assembly
358
A
B
A
Revision A