MacDon M205 Operator's Manual page 24

•
Wear close-fitting clothing and cover long hair. Never
wear dangling items such as scarves or bracelets.
•
Keep all shields in place. NEVER alter or remove safety
equipment. Make sure driveline guards can rotate
independently of shaft and can telescope freely.
•
Use only service and repair parts made or approved by
equipment manufacturer. Substituted parts may not meet
strength, design, or safety requirements.
•
Keep hands, feet, clothing, and hair away from moving
parts. NEVER attempt to clear obstructions or objects
from a machine while engine is running.
•
Do NOT modify machine. Unauthorized modifications
may impair machine function and/or safety. It may also
shorten machine's life.
•
To avoid bodily injury or death from unexpected startup of
machine, ALWAYS stop the engine and remove the key
from the ignition before leaving the operator's seat for
any reason.
•
Keep service area clean and dry. Wet or oily floors are
slippery. Wet spots can be dangerous when working with
electrical equipment. Be sure all electrical outlets and
tools are properly grounded.
•
Keep work area well lit.
•
Keep machinery clean. Straw and chaff on a hot engine is
a fire hazard. Do NOT allow oil or grease to accumulate
on service platforms, ladders, or controls. Clean
machines before storage.
•
NEVER use gasoline, naphtha, or any volatile material for
cleaning purposes. These materials may be toxic and/or
flammable.
•
When storing machinery, cover sharp or extending
components to prevent injury from accidental contact.
214603
SAFETY
Figure 1.5: Safety around Equipment
Figure 1.6: Safety around Equipment
Figure 1.7: Safety around Equipment
4
Revision A