24 Series Mig Torch - Everlast POWER i-MIG 253DP Operator's Manual

Section 2
Setup Guide and component Identification

24 SERIES MIG TORCH

Expanded View
NOTE: Some components may appear slightly different as design/supplier changes are made from time to time. At time of publi-
cation, the standard MIG gun provided with Power i-MIG 253DPi is commonly known as the 24 series. Some units may use a 3 6
series. To determine the series when purchasing parts, the 24 has cooling rings on the gun neck next to the nozzle, and the
copper colored nozzle is split and simply slides on. The 36 series nozzle is larger. This torch may be supplied by Binzel®,
Trafimet®, or other similar manufacturer. The Innotec® listed above is currently the default supplier of the 36 series. Everlast is
not the torch manufacturer, but equips the Power i-MIG units with some of the most proven torches in history. Numerous manu-
facturers all over the world use variations of these torches. The 24 and 36 Series consumables and most parts interchange from
brand to brand within torches of the same series number (except torch handle design and trigger). The widely used Euro-
connecter on the MIG torch also ensures that the customer can fit and install almost any other type MIG torch if they desire, since
most manufacturers offer torches with a Euro connector as an option.
62