Everlast POWER i-MIG 253DP Operator's Manual page 49

Section 2
MIG Control Features of the Power i-MIG 253DPi
Double Pulse 2T
PREFLOW
Double Pulse 4T
PREFLOW
Double Pulse 4T Special
PREFLOW
The graphical representation above depicts the motions of the MIG Gun trigger
in relation to the welding mode. Each movement of the MIG gun trigger signals
the unit to start a new phase of the weld cycle. A "press" of the trigger is one
movement represented by the "down" arrow. A "release" of the trigger is an-
other movement of the torch switch and is represented by the "up" arrow. The
4T special mode is not available to standard and synergic non-pulse modes.
Setup Guide and component Identification
PEAK
WELDING
2T
PEAK
WELDING
4T
HOT START PEAK /ARC FORCE
4TSPCL
49
BURNBACK
TIME VOLTS
END
BURNBACK
TIME VOLTS
WELDING
END
BURNBACK
TIME VOLTS
POSTFLOW
POSTFLOW
POSTFLOW