Everlast POWER i-MIG 253DP Operator's Manual page 65

Section 2
Setup Guide and component Identification
TORCH CONSUMABLE LIST FOR
36 SERIES MIG TORCH (Optional)
NOTE: At time of publication, the standard torch provided with Power i-MIG 275P is commonly known as the 36 se-
ries. This torch may be supplied by Binzel®, Trafimet®, or Innotec®. However the consumables and most parts inter-
change except the torch handle design and trigger. The widely used Euro-connecter on the MIG torch also ensures
that the customer can fit and install almost any other type MIG torch since most manufacturers offer torches with a
Euro connector as an option. This list is provided as a general cross reference as a courtesy from Trafimet®, and does
not guarantee that every variation or type is directly available from Everlast. In the left column, the OEM part num-
bers are listed, and in the far right column, the Binzel®, part number is listed as reference. These parts are inter-
changeable with the Innotec part number. You can find list of stocked consumables on the Everlast website. To cross
reference to the Trafimet® part number, remove the EV prefix from the Everlast Part number.
65