1.1.1. Cyclic white spot/black spot
(1) Symptom
White spot/black spot repeatedly occurs at a certain cycle.
(2) Cause
• Drum unit
Approx. 188mm cycle in a single color
• Developing unit
Approx. 44mm cycle in a single color
• Intermediate transfer belt
Approx. 861mm interval.
st
• 1
transfer roller
Approx 69mm interval
• Opposing roller (?)
Approx 75mm interval
nd
• 2
transfer roller
Approx. 75mm interval.
• Fusing belt
Approx. 311mm interval. On simplex printing, the symptom occurs on 1st side.
3.
Solution
After specifying the problem parts, clean and replace the subject parts.
Table of contents
KONICA MINOLTA Confidential
- 4 -