Konica Minolta AccurioPress C2070 Troubleshooting Manual page 217

4.5.1. IQ-501, C-6A01
(1) Symptom
When Main body connects IQ-501 with VI-501, C-6A01 occurs (Only C2070 series).
(2) Cause
When the main body of C2070 series connects IQ-501with VI-511, C-6A01 may occur due to
static electricity from the display port connector at 4 locations.
Main Body
PRIPB
(3) Solution
Attach Cover/A (A9PJ1385 ) and Cover/B (A9PJ1384) to connectors to prevent leakage of the
static electricity.
Attaching base for A9PJ1384:
Corner of the black plastic. (Red lines in the photo)
Overlap the A9PJ1385.
Corner of Black plastic
Attaching base for A9PJ1385: Corner of the black plastic (Blue lines).
1. Attach A9PJ1385 aligning to the corner of the black plastic, covering 2 sides.
2. Attach A9PJ1384 aligning to the corner of the black plastic overlapping A9PJ1385.
Covers are attached to VI-511 in factory from May 2017 production.
Table of contents
KONICA MINOLTA Confidential
Cable
Cable
4 Red circle points are the
target.
- 216 -
Relay board
Board(Front)
Board(back)