Konica Minolta AccurioPress C2070 Troubleshooting Manual page 167

KONICA MINOLTA Confidential
[Before locking side guide]
ii) Change the air assist setting for the tray to [Manual]
iii) Set [Lead Edge Air Level Setting] weaker by every 1 step
<Countermeasure 4>
・Lock a side guide at machine front.
・Set both of Lead Edge Air Level/Side Air Level weaker.
* For the size like B5S, A5S (182mm or less width) and 257gsm or heavier paper.
<Procedure>
i) Lock the side guide
* Lock a side guide at front only. When both sides are locked, thick paper feed failure
may occur due to the friction of the paper.
[Before locking side guide]
ii) Change the air assist setting for the tray to [Manual].
iii) Set both of the [Lead Edge Air Level Setting]/[Side Air Level Setting] weaker by every
1step.
* When the guide is locked, the duct opening is narrowed
→ Separate air speed increase and paper separation
performance is enhanced
[After locking side guide]
*By locking, the duct opening is narrowed
→Separate air speed increase and paper separation
performance is enhanced
* By locking only front side, minimize the increase of friction
[After locking side guide]
- 166 -