Attaching The Sensor; Figure 10. Attach Sensor - Nonin WristOx2 3150 Operator's Manual

Using the WristOx Model 3150
2,

Attaching the Sensor

The sensor can be connected to the device before or after applying the device to the patient.
The following steps apply to these Nonin sensors:
• 8000SS-WO2, 8000SM-WO2, 8000SL-WO2
• 8000AA-WO2
• 8000J-WO2
NOTE: Refer to the sensor Instructions for Use for appropriate sensor sizing.
If using another Nonin-branded sensor, use sensor adapter cable 3150I (see "Parts and
Accessories").
WARNING: Only use Nonin-branded sensors with a length of 1 meter or less.
Accuracy may degrade if sensor cable is over 1 meter in length. Using the sensor
cable adapter does not affect accuracy.
1. Insert the sensor connector into the sensor port at the top of the device (figure 10). The
Nonin logo on the sensor connector should face the front of the device.
2. Push the connector until it clicks into place.
3. The device is ready to use.
Figure 10: Attach Sensor
19