Using The Wristox Model 3150; Installing Batteries; Figure 4. Remove Battery Door; Figure 5. Insert Batteries - Nonin WristOx2 3150 Operator's Manual

Using the WristOx Model 3150
2,
Using the WristOx
WARNING: Do not use the device when alarms are required.
WARNING: The USB cable must be unplugged from the device before replacing batteries.

Installing Batteries

WARNING: Before changing the batteries, make sure the device is off and the sensor
is not applied to a digit.
1. Open the battery compartment by sliding the battery door off the back of the
device (figure 4).
2. Insert 2 new AAA batteries (figure 5). Battery orientation is shown inside the battery
compartment.
3. Replace battery door by sliding it back into place.
Model 3150
2,
Figure 4: Remove Battery Door
Figure 5: Insert Batteries
15