Electrical Connection; Spectra V01.0 - Kinetec Spectra User Manual

KINETEC Spectra is a type B class I device.
Before connecting the device to the power supply, check that the mains voltage
matches that shown on the identification plate (100-240 V~ 50-60Hz).
Connect the hand control (4)
Connect the power supply cable (25).
IMPORTANT IMPORTANT
Check that the electrical socket is in good condition and is suitable for the splint power
supply cord. The latter complies with current standards and has a grounding socket.
The plug may be connected to any standard socket.
The socket must however have a grounded pin.
To connect the power supply, only use the original cable supplied with the machine.
Check that the cables remain free around the device so that they do not get damaged.
Switch on (9).
While the unit begins an auto diagnostic, the display shows the following :
KINETEC

Spectra V01.0

Your KINETEC Spectra is ready to be used.
25 25
Please wait

Electrical connection

Electrical connection
9 9
4 4
Starting the unit Starting the unit
Kinetec
30 STOP 15 90
GB
5 5