Removing The Connector Cover - Sony LMD-X310MT Instructions For Use Manual

Removing the Connector
Cover
To use the connector, remove the connector cover as
follows.
Before removing the connector cover, disconnect the
power cord.
1
Loosen the two screws.
2
Slide the connector cover in the direction of the
arrow and remove it.
3
Remove the two screws and cable clamp.
Caution
Do not remove screws other than the two screws
fixing the clamp. Doing so may cause electric shock.
LMD-X310MT
Clamp
22

Removing the Connector Cover

LMD-X550MT
Clamp
4
Position the connecting cable under the attaching
cable clamp.
5
Attach the connector cover.
When using a thick connecting cable that cannot be
positioned under the attaching cable clamp or connector
cover, do not forcefully fix the cable. Use the unit with
the connector cover removed.
Caution
This unit with the connector cover attached conforms to
the waterproofed standard. (LMD-X310MT: See page
34, LMD-X550MT: See page 35)
Be sure not to use the unit with the connector cover
removed since waterproofed performance is not
guaranteed.