Location And Function Of Parts And Controls; Front Panel - Sony LMD-X310MT Instructions For Use Manual

Location and Function of Parts and Controls

Front Panel

 Power indicator
When the power is turned on, the power indicator lights
in green.
When the protection function is activated and the
display brightness is reduced due to the rise in
temperature, it flashes in amber.

CONTROL button
Displays or clears the operating buttons on the front
panel.
Selects the items depending on the menu types.
 OSD menu operation buttons
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
/// buttons
Press to select the items and setting values.
 2D/3D select button
Switches between 2D and 3D displays.
 CUSTOM button
16
Location and Function of Parts and Controls
Turns on or off the assigned function. You can adjust the
assigned function by pressing the / buttons. (Refer to
the custom buttons of the system configuration menu on
page 31 and of the default setting on page 32.)
The following functions are assigned in the default
setting.
CUSTOM 1: Brightness
CUSTOM 2: Contrast

A.I.M.E. button
1)
Sets the A.I.M.E.
function to Off and On. When the
A.I.M.E. function is set to On, A.I.M.E. Structure and
A.I.M.E. Color can be adjusted.
1) A.I.M.E.: Enables better image reproduction and display.
 2 or 3 screen display setting buttons
PIP/POP: For displaying the 2 or 3 screen display
or switching the 2 or 3 screen display mode.
SWAP: For swapping between the main display
and the sub display.
 Input select buttons
PORT A: Displays the input signal assigned to
PORT A. When the input signal of PORT A is