Adjusting And Changing The Settings; Color Tone Adjustment Menu - Sony LMD-X310MT Instructions For Use Manual

Pattern Skip
Input Configuration
Input Name
HDCP Setting
System Configuration
Control Lock
OSD Setting
Power On Setting
Power Save
Serial Remote
Ethernet Setting
Custom Button
Panel Display
Monitor Information
Initial Setup
Language
Pattern Skip
PIP / POP
Custom Button
Preset
Load User Setting
Save User Setting
User Name
Load Default

Adjusting and changing the settings

Color Tone Adjustment menu

The Color Tone Adjustment menu is used to adjust
picture quality for each input.
You need to use the measurement instrument to adjust
the color temperature.
Recommended: Konica Minolta color analyzer CA-310
Submenu Setting
Gamma Select the appropriate gamma mode
from among "1.8, " "2.0, " "2.2, " "2.4, "
"2.6, " "DICOM, " "Highlight. "
"DICOM" is for reference, not
diagnostic, purposes only.
Phase Adjusts color tones. The higher the
setting, the more greenish the picture.
The lower the setting, the more purplish
the picture.
Chroma Adjusts color intensity. The higher the
setting, the greater the intensity. The
lower the setting, the lower the
intensity.
Brightness Adjusts brightness.
Submenu Setting
Contrast Adjusts contrast.
A.I.M.E. Select from among "Off, " "On" and
"Check Mode. "
When you select "Check Mode, " two
images of A.I.M.E.
are displayed.
1) A.I.M.E.: Enables better image
reproduction and display.
Notes
A.I.M.E. Logo is displayed on the

display area where the A.I.M.E.
function is activated.
When the HD/SD quad view is set,

A.I.M.E. functions for only the SDI
1-A input.
When the PIP/POP view is set,

A.I.M.E. functions for only the main
display.
The "Check Mode" is available only

in 2D. When selected in 3D, "On"
functions.
A.I.M.E. Structure Adjusts the contrast enhancement.
A.I.M.E. Color Adjusts the color enhancement.
Gradation Extension Displays the expanded gradation of a
specific color.
Select "On" or "Off. "
Color Temperature Select the color temperature from
among "D65, " "D93. "
Note
If the setting is changed, Gain R/G/B
Offset and Bias R/G/B Offset are
restored to 0 respectively.
Gain R Offset Adjust color temperature in detail, and
Gain G Offset color balance (Gain).
Gain B Offset
Bias R Offset Adjust color temperature in detail, and
Bias G Offset color balance (Bias).
Bias B Offset
Mono Sets the display to a monochrome
picture. Set to "On" for a monochrome
picture, set to "Off" for a normal
(chromatic) picture.
Sharpness H Adjusts the horizontal sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the softer
the picture.
Sharpness V Adjusts the vertical sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the softer
the picture.
RGB Range Sets the RGB signal range. Select from
among "Auto, " "Limited, " "Full. " If you
set to "Auto, " this item is set to
"Limited" when inputting video signal,
and "Full" when inputting PC signals.
Color Space Select the color gamut from among
"BT.709, " "Native, " "BT.2020, " "Auto. "
1)
being "Off" / "On"
27
Adjustment Using the Menus