5
Connect the plug of the AC power cord to an AC
outlet.
To remove the AC power cord
Press the (On)/
(Standby) switch to the
switch the unit to the standby state, then remove the AC
power cord from the AC power plug holder by holding
the fixing levers of the holder from both sides to release
the lock. Then, remove the DC connector from the unit.
LMD-X550MT
1
Make sure that the (On)/
to
(in a standby state).
2
Insert the AC power cord to the AC input connector
of the rear panel and attach the AC power plug
holder to the AC power cord.
AC input
connector
AC power cord
AC power plug
holder
3
Insert the AC power plug holder until the fixing
lever locks.
side and
(Standby) switch is set
4
Connect the plug of the AC power cord to an AC
outlet.
To remove the AC power cord
Press the (On)/
(Standby) switch to the
switch the unit to the standby state, then remove the AC
power cord from the AC power plug holder by holding
the fixing levers of the holder from both sides to release
the lock.
side and
21
Connecting the AC Power Cord