Table of Contents
Advertisement
ECI-B14Fx Network Bullet Camera Quick Start Guide
2.1 Ceiling/Wall Mounting
Before You Start
Both wall mounting and ceiling mounting are suitable for the bullet camera.
Ceiling mounting will be taken as an example in this section. Use these
ceiling mounting steps as a reference for wall mounting.
1. Paste the drill template (supplied) to the desired mounting position on
the ceiling/wall.
2. Drill the screw holes in the ceiling/wall according to the supplied drill
template.
Note:
Drill the cable hole if using the ceiling outlet to route the cable.
Cable Hole
3. Route the cables through the cable hole (optional) or the side opening.
4. Fix the camera on the ceiling/wall with supplied screws.
QSG VE ECI-B14Fx 060118NA
Screw Hole
template
Side
Opening
The Drill Template
3-Φ 4 mm
Φ 55 mm
Φ 68 mm
Φ 18 mm
8
Advertisement
Table of Contents
