Operate Via Hik-Connect App; Enable Hik-Connect For Use With Cameras; Enable Hik-Connect Service Via Sadp Software - HIKVISION ECI-B14F2 Quick Start Manual

ECI-B14Fx Network Bullet Camera Quick Start Guide
5. Install the plug-in before viewing the live video and managing the
camera. Follow the installation prompts to install the plug-in.
NOTE:
You may have to close the Web browser to finish installing the plug-in.
6. Reopen the Web browser after installing the plug-in and repeat steps 2
to 4 to login.
NOTE:
For further configuration instructions, see the network camera user manual.

3.5 Operate via Hik-Connect App

Hik-Connect is a mobile application to view live camera images, receive
alarm notifications, etc.

3.5.3 Enable Hik-Connect for Use with Cameras

Install Hik-Connect onto your camera before using the service. You can
enable the service either via SADP software or a Web browser.

3.5.4 Enable Hik-Connect Service via SADP Software

1. Check the Enable Hik-Connect checkbox.
1) For the "Activate the Device" page that appears during camera
activation, refer to Chapter 3.2.2.
2) For the "Modify Network Parameters" page that appears while
modifying the IP address, refer to Chapter 3.3.
QSG VE ECI-B14Fx 060118NA
Login Interface
Download Plug-in
18