Activate The Camera; Activation Via Web Browser - HIKVISION ECI-B14F2 Quick Start Manual

ECI-B14Fx Network Bullet Camera Quick Start Guide

3.2 Activate the Camera

You must activate the camera first by setting a strong password for it before
use.
Activation via Web browser, SADP, and client software are all supported. We
will take activation via SADP software and activation via Web browser as
examples to introduce camera activation.
NOTE:
Refer to the of Network Camera user manual for activation via client
software.

3.2.1 Activation via Web Browser

1. Power on the camera.
2. Connect the camera to your computer or the switch/router that your
computer connects to.
3. Input the IP address into the Web browser address bar.
4. Press Enter to enter the activation interface.
NOTES:
The camera's default IP address is 192.168.1.64.

The computer and the camera should belong to the same subnet.

For cameras that enable DHCP by default, you will need to use the SADP

software to search for the IP address.
5. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED – We highly
recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
We also recommend that you reset your password regularly.
Especially in high security systems, resetting the password
monthly or weekly can better protect your product.
6. Confirm the password.
7. Click OK to save the password and enter the live view interface.
QSG VE ECI-B14Fx 060118NA 14