Activation Via Sadp Software - HIKVISION ECI-B14F2 Quick Start Manual

ECI-B14Fx Network Bullet Camera Quick Start Guide

3.2.2 Activation via SADP Software

SADP software is used for detecting the online device, activating the camera,
and resetting the password.
Get the SADP software from the supplied disk or the official Web site, and
install it according to the prompts.
Follow the steps to activate the camera.
1. Run the SADP software to search the online devices.
2. Check the device status on the device list, and select the inactive device.
NOTE:
The SADP software supports activating the camera in batch. Refer to the
SADP software user manual for details.
3. Create and input the new password in the password field.
4. Confirm the password.
STRONG PASSWORD RECOMMENDED – We highly
recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
We also recommend that you reset your password regularly.
Especially in a high security system, resetting the password
monthly or weekly can better protect your product.
NOTE:
QSG VE ECI-B14Fx 060118NA
Select inactive device.
Input and confirm
password.
SADP Interface
15