HIKVISION ECI-B14F2 Quick Start Manual page 5

ECI-B14Fx Network Bullet Camera Quick Start Guide
Cautions
Do not drop the camera or subject it to physical shock.

Do not place the camera in extremely hot, cold (the operating

temperature shall be -40° to 60° C), dusty or damp locations, and do not
expose it to high electromagnetic radiation.
Do not touch senor modules with fingers.

If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it

gently.
Do not aim the camera at the sun or extra bright places.

The sensor may be burned out by a laser beam, so when any laser

equipment is in using, make sure that the surface of sensor will not be
exposed to the laser beam.
Do not expose the device to high electromagnetic radiation or extremely

hot, cold, dusty or damp environment.
To avoid heat accumulation, good ventilation is required for the operating

environment.
Keep the camera away from liquid while in use for non-water-proof

device.
While in delivery, the camera shall be packed in its original packing, or

packing of the same texture.
Mark Description
Mark Description
DC Voltage
QSG VE ECI-B14Fx 060118NA 5