ECI-B14Fx Network Bullet Camera Quick Start Guide
3) Create or change the verification code.
NOTE:
The verification code is required when adding the camera to Hik-Connect.
2. Click and read the "Terms of Service" and "Privacy Policy."
3. Confirm the settings.
3.5.5 Enable Hik-Connect via a Web Browser
Before You Start
Activate the camera before enabling the service. Refer to Chapter 3.2. for
more information.
1. Access the camera via a Web browser. Refer to Chapter 4.
2. Enter the platform access configuration interface, as follows:
Configuration > Network > Advanced Settings > Platform Access.
QSG VE ECI-B14Fx 060118NA
Verification Code Setting (SADP)
19