HIKVISION ECI-B14F2 Quick Start Manual page 9

ECI-B14Fx Network Bullet Camera Quick Start Guide
NOTES:
The supplied screw package contains both self-tapping screws and

expansion bolts.
If the ceiling is cement, expansion bolts are required to fix the camera. If

the ceiling is wood, self-tapping screws are required.
5. Connect the corresponding power cord, and network cable.
6. Power on the camera.
7. Set the network configuration (for details, refer to 3 Set the Network
Camera over the LAN and 4 Access via Web Browser) to check if the
image is at an optimum angle. If not, adjust the surveillance angle.
1) Loosen the no.1 adjusting screw to adjust the rotation position [0° to
360°].
2) Tighten the no.1 adjusting screw.
3) Loosen the no.2 adjusting screw to adjust the tilting position [-90° to
90°].
4) Tighten the no. 2 adjusting screw.
5) Loosen the no.3 fix ring to adjust the pan position [0° to 360°].
6) Tighten the no.3 fix ring.
QSG VE ECI-B14Fx 060118NA
Mount the Camera to the Ceiling/Wall
9