Appearance Description; Installation; Ceiling/Wall Mounting - HIKVISION ECI-B12F Quick Start Manual

ECI-B12Fx Network Bullet Camera Quick Start Guide

1 Appearance Description

This network bullet camera appearance is shown as the figures below.
No. Description
1 Lens
2 Front Cover
3 Back Cover
4 Fix Ring
5 Power Cord
6 Network Cable
NOTE:
For power over Ethernet (PoE), the power is passed along with data on
Ethernet cabling. A switch that supports the PoE function is required.

2 Installation

Before You Start:
Make sure the device in the package is in good condition and all the

assembly parts are included.
The standard power supply is 12 VDC, make sure your power supply

matches your camera.
Make sure all related equipment is powered off during the installation.

Check the product specification for the installation environment.

Make sure that the wall is strong enough to withstand four times the

weight of the camera and the bracket.
Make sure that there are no reflective surfaces too close to the camera

lens. The IR light from the camera may reflect back into the lens causing
reflection.

2.1 Ceiling/Wall Mounting

Before You Start
QSG VE ECI-B12Fx 060118NA
Network Bullet Camera Overview
7