Table of Contents
Advertisement
ECI-B14Fx Network Bullet Camera Quick Start Guide
NOTE:
You can enable the Hik-Connect service for the device during activation.
Refer to Chapter 5.1 for detailed information.
1. Input the admin password and click Modify to activate your IP address
modification.
2. Batch IP address modification is supported by the SADP. Refer to the
SADP user manual for details.
3.4 Access via Web Browser
System Requirement:
Operating System: Microsoft Windows XP SP1 and above version
CPU: 2.0 GHz or higher
RAM: 1 GB or higher
Display: 1024 × 768 resolution or higher
Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.0.2
and above version, Mozilla Firefox 5.0 and above version and Google
Chrome 18 and above version
1. Open the Web browser.
2. In the browser address bar, input the IP address of the network camera,
and press the Enter key to enter the login interface.
NOTE:
The default IP address is 192.168.1.64. You are recommended to change the
IP address to the same subnet as your computer.
3. Input the user name and password.
NOTE:
The admin user should configure the device accounts and user/operator
permissions properly. Delete the unnecessary accounts and user/operator
permissions.
NOTE:
The device IP address locks if the admin user performs seven failed
password attempts (five attempts for a user/operator).
4. Click Login.
QSG VE ECI-B14Fx 060118NA
17
Advertisement
Table of Contents
