HIKVISION ECI-B14F2 Quick Start Manual page 11

ECI-B14Fx Network Bullet Camera Quick Start Guide
3. Take apart the junction box, and align the screw holes of the bullet
camera with those on the junction box' cover.
4. Fix the camera on the junction box's cover with three PM4 × 10 screws.
5. Secure the junction box's body on the wall with three supplied screws.
6. Route the cables through the cable hole. Here we take the bottom cable
hole as an example to describe the installation.
1) Separate the waterproof cover and the cable gland from the junction
box.
2) Route the cable through the bottom cable hole and the cable gland.
3) Screw the cable gland back onto the bottom cable hole.
4) Screw the waterproof cover back onto the side cable hole.
QSG VE ECI-B14Fx 060118NA
Mount Camera onto Junction Box Cover
Waterproof
Cover
Cable Gland
Fasten the Junction Box to the Wall
Junction Box
Cover
11