NEC Express5800/T120e Maintenance Guidance page 46
Express5800 series
Hide thumbs
Also See for Express5800/T120e:
- Quick start manual (6 pages) ,
- Specifications (2 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
Chapter 1 Maintenance
Clearing a password
1. Turn off the server, and disconnect the AC power cord from power supply units.
See "Getting Started" attached to this server or Chapter 2 (1. Installing Internal Optional Devices) in
"User's Guide" to remove Side Cover.
2. Confirm the position of Clear Password Jumper.
3. Change the jumper from Keep to Clear.
4. Reassemble the server and press POWER Switch to turn on the server.
5. POST halts with the following error message
ERROR
8007: Password Cleared By Jumper.
Press<F1> to resume, <F2> to Setup
6. Press <F2> key to start BIOS Setup Utility and change the password, and then execute Save
Changes and Exit.
7. Turn off the power and return the jumper to Keep by following steps 1 and 2.
8. Reassemble the server.
46
Express5800/T120e Maintenance Guide
7. Resetting and Clearing the Server
Advertisement
Table of Contents
