Windows System Recovery; Recovery Of Windows Server 2012; Recovery Of Windows Server 2008 R2 And Windows Server 2008 - NEC Express5800/T120e Maintenance Guidance

Chapter 1 Maintenance
6.

Windows System Recovery

Recover the Windows system by following the instructions below if the files necessary to operate Windows are
corrupt.
6.1

Recovery of Windows Server 2012

If the Windows does not start correctly, you can recover it using the feature of the Windows installation disc.
To run this feature, start the installation disc, and then choose Repair your computer in Windows Setup
wizard.
We recommend that this option is performed by the system administrator.
6.2

Recovery of Windows Server 2008 R2 and Windows Server 2008

If Windows does not start for some reason, you can recover Windows using the system recovery option. Be
sure to perform this operation under the supervision of a user or administrator who has a thorough knowledge
of this option. For details, refer to Windows Help.
When the OEM drivers are required, copy the files under the following designated folder in
EXPRESSBUILDER to removable media.
 Windows Server 2008 R2:
 Windows Server 2008 64-bit Edition:
 Windows Server 2008 32-bit Edition:
 After recovering the system, be sure to install each driver and Starter Pack.
Note
See "Installation Guide (Windows)" to install Starter Pack and device drivers.
 If hard disk drives cannot be detected, you cannot recover the Windows system.
 Create the OEM drivers to removable media depending on the server
configuration.
\005\win\winnt\oemfd\ws2008r2
\005\win\winnt\oemfd\ws2008x64
\005\win\winnt\oemfd\ws2008
Express5800/T120e Maintenance Guide
6. Windows System Recovery
41