NEC Express5800/T120e Maintenance Guidance page 130

Chapter 3 Appendix
BMC Message on Lower LCD Line
Baseboard Temperature2 Upper
Critical
Ambient Temperature Lower
Non-Critical
Ambient Temperature Upper
Non-Critical
Ambient Temperature Lower
Critical
Ambient Temperature Upper
Critical
CPU1-DIMM Area Temperature
Lower Non-Critical
CPU1-DIMM Area Temperature
Upper Non-Critical
CPU1-DIMM Area Temperature
Lower Critical
CPU1-DIMM Area Temperature
Upper Critical
CPU2-DIMM Area Temperature
Lower Non-Critical
CPU2-DIMM Area Temperature
Upper Non-Critical
CPU2-DIMM Area Temperature
Lower Critical
CPU2-DIMM Area Temperature
Upper Critical
Processor1 Thermal Control
Upper Non-Critical
Processor1 Thermal Control
Upper Critical
Processor2 Thermal Control
Upper Non-Critical
Processor2 Thermal Control
Upper Critical
DUMP Request !
OS shutdown Alm
Power Supply1 Failure
detected
Power Supply2 Failure
detected
130
Cause
A temperature abnormality was

detected.

The dump button was pressed.
An OS stop error occurred.
A power supply unit abnormality
occurred.
Express5800/T120e Maintenance Guide
1. POST Error Message
Solution
It is possible that a fan has failed or is
clogged. Contact your sales
representative.
It is possible that a fan has failed or is
clogged. Contact your sales
representative.
Wait until collecting the memory dump
data has finished.
Record the displayed message, wait
until collecting the memory dump data
has finished, and then contact your
sales representative.
Make sure that the power cord is
plugged in. If this does not resolve the
problem, contact your sales
representative.
(2/5)