➋-4 Configuring The Settings; How To Configure The Settings - Elmo PX-10 Instruction Manual

➋-4 CONFIGURING THE SETTINGS
Each setting of the PX-10/30 can be configured through the menu (texts or icons) displayed on the
screen.

◆HOW TO CONFIGURE THE SETTINGS

Press the Settings button [
The settings menu appears. "System Setting", "Image Quality Setting",
"Network Settings", and "Product Information" can be selected from the menu.
［✔ ： Default setting（default value） ］
Menu
System Setting
Image Quality Setting
Network Settings
Product Information
System Setting
（1/5 page）
Name
Resolution
VIewing angle ※1
Flicker mode
] on the operating panel.
To display the menu for configuration of the system.
To display the menu for configuration of the camera image.
To display the menu for configuration of the network function.
（ ）
For PX-30 only
To display the information of the version and license of the camera.
Selection item
Auto✔
UHD（3840 x 2160）
FHD（1920 x 1080）
HD（1280 x 720）
UXGA（1600 x 1200）
XGA（1024 x 768）
Normal (16：9）✔
Full (4：3）
50Hz
60Hz✔
OFF
ND Filter
Function
To set the resolution of the output image.
※The PX-10 does not support UHD（3840 x 2160）.
To set the viewing angle of the output image.
When there is flickering in the image due to the
fluorescent light, set to the same value as the power
supply frequency of the location where the PX-10/30
is used.
50Hz: Europe
60Hz: Japan/USA
Select this item when there is halation due to
flickering. (For example, when shooting outside or
when the surrounding environment is too bright.)
Flickering may be reduced.
27
Function
Pages
⇒P.27
⇒P.30
⇒P.31
⇒P.31