Supplied Accessories; Remote Control; ➋-2 Supplied Accessories - Elmo PX-10 Instruction Manual

➋-2

SUPPLIED ACCESSORIES

◆REMOTE CONTROL

PREPARATION OF THE REMOTE CONTROL
Remove the battery case by squeezing the release lock.
Insert the coin battery into the battery case, so you see the positive (+) side facing up.
Then insert the battery case into the remote control.
Release lock
③
①
②
RECEIVING IR FROM THE REMOTE CONTROL
Point the IR transmitter of the remote control to the IR receiver of the PX-10/30, and press the
desired button.（⇒P.12）
Receivable range: within approx. 5m
※1
Button Name/Function
AF
To focus automatically.
Zoom out
To shrink the camera image.
Zoom in
To enlarge the camera
image.
Default
To initialize the brightness
settings.
Brightness DOWN
To darken the camera image.
Brightness UP
To brighten the camera
image.
Image rotation
To rotate the camera image.
※1
Freeze
To pause and restart the
camera image.
In the System Setting menu, the rotation angle can be selected
between 90°and 180°. （⇒P.29）
WARNING
Children may ingest small batteries; always keep
batteries safe and out of reach.
If a battery is swallowed, consult a doctor
immediately as this could result in asphyxiation or
be an obstacle to digestion, etc.
Button
17
Name/Function
LED lighting
To ON/OFF the LED lighting.
Camera
To display the camera image.
RGB in
To display images being input to
the RGB in port.
HDMI in 1
To display images being input to
the HDMI in 1 port.
HDMI in 2
To display images being input to
the HDMI in 2 port.
Capture
To save the currently displayed
image as a still image.
Recording
To start and stop recording.
Power
To ON/OFF the power.