Adjusting The Brightness - Elmo PX-10 Instruction Manual

◆ADJUSTING THE BRIGHTNESS

Press the Brightness button [
adjustment. The image brightness can be adjusted by sliding the bar to the right or left, or by using
the [ / ] buttons on the remote control.
Press the Default button [
control to initialize the brightness settings.
＜Operating panel＞
ON/OFF
Initialize
the LED
lighting
Icon
LCD Remote
touchscreen control
-
NOTE
・In places where the subject is exposed to bright sunlight (e.g. near a window), or
extremely bright lights, the brightness of the screen may not dim sufficiently, even when
the iris is closed from the touchscreen or the [
pressed.
In such cases, to adjust the amount of light, close the curtains or move the subject
away from the light.
・The brightness adjustment is not possible when the external input is selected in the input
selection menu.
] on the operating panel to display the menu for brightness
] on the operating panel or the Default button [
← →
Darken Brighten
Name
Lighting
- Iris (brightness)
Brightness
Default
- Anti-reflection
- Return
＜Remote control＞
To ON/OFF the LED lighting.
OFF ← → ON
To adjust the iris with a slide bar to change the
brightness.
Iris close (dark) ←
To change the brightness of the camera image.
To initialize the brightness settings.
To ON/OFF the anti-reflection function.
（Reduce light reflection）
OFF：Disable ← → ON：Enable
To return to the camera image.
] button on the remote control is
24
] on the remote
Function
→ Iris open (bright)