➍ Error Messages - Elmo PX-10 Instruction Manual

➍ ERROR MESSAGES
Error message
SD card is not ready.
SD card is full. Recording is
stopped.
SD card/USB flash drive is not
ready.
Displaying RGB input
Cannot display images
Failed to delete file.
Failed to format.
Possible cause/Countermeasure
The PX-10/30 failed to start the video recording.
Check the followings:（⇒P.15、34）
・The SD card is not inserted into the SD card slot.
・The SD card is broken.
・The remaining capacity of the SD card is insufficient
・The SD card is not formatted.（⇒P.29）
・The SD card was removed during data saving.
The video recording stopped because there is insufficient free
space on the SD card. (A video recording file up to the point the
recording is stopped will be created.)
Replace the SD card or delete unnecessary files.（⇒P.38）
The PX-10/30 failed to capture a still image.
Check the followings:
・The SD card/USB flash drive is broken.
・The remaining capacity of the SD card/USB flash drive is
insufficient.
・The SD card/USB flash drive is not formatted.（⇒P.29）
・The SD card/USB flash drive was removed during data saving.
When outputting the image being input to the RGB in port to an
external monitor, no image is displayed on the LCD touchscreen.
（⇒P.26）
This message appears when HDCP-protected signals is input to
the PX-10/30 after selecting the HDMI in the Select image menu.
（⇒P.26）
To display images on the LCD touchscreen, input unencrypted
HDMI signals.
The PX-10/30 failed to delete the file.
The thumbnail list screen will be displayed in 2 seconds after this
message. Try again from the beginning.
The PX-10/30 failed to format the SD card/USB flash drive.
Try again from the beginning.
44