Details About Functions - Elmo PX-10 Instruction Manual

◆DETAILS ABOUT FUNCTIONS

FREEZE
To pause the camera image.
Press the Freeze button [
image.
You can set whether to freeze the image on the LCD touchscreen when Freeze function is activated
from the System Setting. (⇒ [Move/Freeze] : P.29)
IMAGE ROTATION
To rotate the camera image.
Press the Image rotation button [
rotate the image.（⇒P.13、P.17）
You can set the angle of image rotation from the System Setting. ［90°／180°］（⇒P.29）
MASK
To mask a part of the image.
How to use MASK
Press the Settings button [
displayed on the monitor. Select "Image mask" from the "Image Quality Setting". （⇒ P.30）
By pressing "Image mask", you can setup the mask tool on the LCD touchscreen.
Select the area to be masked by dragging on the screen with your finger. (The color of the mask is
blue.)
Tap [ ] to apply. (The color of the mask is black.)
The number of mask that can be applied to the image is one. When [
new mask, a previously created mask disappears.
Tap [ ] to remove the applied mask.
NOTE
・The mask function is available only when the "Camera image" is selected in the Select image
menu.
・It is not possible to record the image with a mask.
・The mask does not follow the change of the lens (zoom in/ zoom out, lens direction). It is
advisable not to use the mask function for the purpose of hiding confidential information.
] on the operating panel or [
] on the operating panel or [
] on the operating panel while the camera image or a playback image is
32
] on the remote control to pause the
] on the remote control to
] is tapped after creating a
RETURN To return to the previous screen.
APPLY To output the contents of the LCD
touchscreen to the connected device.
DELETE To remove the created mask.