Installing The Distributor (Sold Separately) - Panasonic VL-VM701 Installation And Operating Instructions Manual

4.5 Installing the distributor (sold
separately)
Required items
– Distributor (VL-VM701; sold separately)
– Cable binders (included with distributor)
– Screws (included with distributor)
– Wires for the distributor connection (user supplied)
See 4.6.2 Wire type and maximum wire length
(Page 39).
Note:
R For more information about connections for the
VL-VM701 distributor, refer to step 10 on page 33.
Installation methods
The following 2 methods can be used for installation.
– mounting on a DIN rail (user supplied)
– attaching directly to a wall
4.5.1 Mounting on a DIN rail
Attach the distributor to the DIN rail so that the bottom
hook is positioned at the bottom of the distributor.
1
Hang the top hooks (A) of the distributor on the top
of the DIN rail.
R At this point the distributor will be hanging from
the DIN rail but will not be secure.
2
Pull the lever (B) down, make sure the bottom of the
distributor is flat against the DIN rail, and then release
to lever.
R The bottom hook (C) will slide up, securing the
bottom of the distributor to the DIN rail.
A
B
C
4.5.2 Attaching directly to a wall
Attach the distributor to the wall securely using the 2
mounting screws (A).
R Attach the bottom cable cover after attaching the
distributor to the wall.
A
4. Installation
35