Sw-1610/1611/1613 Board - Sony PMW-300 Service Manual

2-6-2.

SW-1610/1611/1613 Board

Preparation
1. Remove the bottom panel assembly. (Refer to
2. Remove the inside panel assembly. (Refer to
Procedure
1. Disconnect the flexible flat cable from the connector (CN10) on the KY-706 board.
2. Remove the six screws to detach the SW bracket A, SW bracket B, button (cancel), and button (menu).
Precision screws
(P2 x 4)
SW bracket B
Precision screws
(P2 x 4)
Note
When installing the SW bracket A and the SW bracket B, fit the four bosses with the four holes.
PMW-300
"2-5. Bottom Panel
"2-6-1. Inside Panel
Button (cancel)
Flexible flat cable
SW bracket A
Bosses/Holes
SW bracket B
Assembly")
Assembly")
Button (menu)
Bosses/Holes
SW bracket A
CN10
(KY-706 board)
2-22