Table of Contents
Advertisement
2-8.
Rear Panel Assembly
Preparation
1.
Remove the bottom panel assembly. (Refer
2.
Remove the inside panel assembly. (Refer
3.
Remove the outside panel assembly. (Refer
Procedure
1.
Open the IO cover (A).
2.
Remove the screw to detach the USB cover.
3.
Remove the three screws.
4.
Release the claw to detach the rear panel assembly.
5.
Install the removed parts by reversing the steps of removal.
PMW-300
to"2-5. Bottom Panel
Assembly")
to"2-6-1. Inside Panel
Assembly")
to"2-7-1. Outside Panel
Assembly")
Claw
Rear panel assembly
IO cover (A)
USB cover
Precision screw
(P2 x 5)
Precision screw
(P2 x 5)
Precision screws
(P2 x 5)
2-27
Advertisement
Table of Contents
